The AirTAC Airtac GFR Filter Regulators GFR20006JC2WG is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a differential-pressure drain and regulates 0.15 - 0.9 MPa (20 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The GFR20006JC2WG is an AirTAC GFR-series filter regulator: it removes water and particulate from compressed air and holds a regulated downstream pressure in one body. This size-200 configuration has a G1/8 (BSPP) port, the 5 um (W) filter element instead of the standard 40 um grade, and a differential-pressure drain, the default drain type for the family. A round pressure gauge with a psi scale is fitted, the regulator is the standard type with an adjustment range of 0.15-0.9 MPa (20-130 psi), and the unit is ordered without a mounting bracket (J code). Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing. The bowl on this size is polycarbonate (PC); only size 600 uses an aluminium alloy bowl.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 to 1 inch, drain choices of differential-pressure, automatic or manual, filtration of 40 um standard or 5 um optional, embedded square or external round gauges in MPa, psi or bar scales, and PT, G or NPT threads. Flow for this series is published as curves rather than a single rated figure, so ask us to confirm sizing and datasheet figures for your application before ordering.
| Model | Airtac GFR Filter Regulators GFR20006JC2WG |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (G (BSPP) thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.15 - 0.9 MPa (20 - 130 psi) |
| Pressure type | Standard type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Differential-pressure drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. Standard type, regulating 0.15 - 0.9 MPa (20 - 130 psi). Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Drain: Differential-pressure drain — this also sets the regulating band (0.15 - 0.9 MPa (20 - 130 psi)). |
| (blank) | Standard type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| G | G (BSPP) thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Point-of-use filter regulation ahead of a CNC machine's pneumatic clamping and tool-change cylinders, with the 5 um element helping protect precision valves from fine particulate.
A filter regulator feeding the cylinders on a carton-sealing or labelling machine, keeping a steady set pressure at the actuators while water and dirt are stripped from the shop air.
Clean, regulated air at the gripper manifold of a pick-and-place or SMT handling machine, where the 5 um grade suits sensitive small-bore pneumatic components.
Choose the size by the flow your line needs: this unit is size 200 with a 1/8 in port, and the larger 300, 400 and 600 frames step up in port size and capacity - ask us to check the flow curves against your demand before you order. This configuration carries the 5 um (W) element; choose the standard 40 um grade instead if your downstream equipment does not need finer filtration. Drain options are differential-pressure (fitted here), automatic (A) or manual (M). Gauge choices are an embedded square gauge or an external round gauge in MPa, psi or bar scales; this unit has the round psi gauge. The thread here is G (BSPP); PT is the standard thread and NPT is an order option. Brackets are optional, and this unit is specified without one.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR200 series as curves rather than a single rated figure, so we do not quote a number here. Tell us your downstream demand and working pressure and we will confirm sizing from the datasheet on request.
The standard GFR element grade is 40 um; the W code specifies the optional 5 um element for finer filtration where downstream valves, cylinders or instruments need cleaner air. This model is the 5 um (W) version, and the 40 um grade remains available across the family.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.