The AirTAC AirTAC GFR200-06 Filter Regulator 1/8 in PT, 5 um, Manual is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06 is a filter regulator: it removes water and particulate from compressed air and regulates downstream pressure in one body. This unit sits on the size 200 frame with a 1/8 in PT port, carries the finer 5 um filter element (code W), and drains by hand via its manual drain (M). It is the low-pressure (L) type, a round psi gauge is fitted, a reverse/check valve (K) is installed, and no mounting bracket is supplied. The polycarbonate bowl allows a visual check of collected condensate. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C, non-freezing.
This is a genuine AirTAC part. The GFR family spans sizes 200, 300, 400 and 600 with ports from 1/8 in up to 1 in, and options across drain type, 40 um or 5 um filtration, gauge style and scale, G (BSPP) or NPT threads, and brackets. Flow is published as curves rather than a single rated figure, so ask us to confirm sizing and any datasheet figure for your application before ordering.
| Model | AirTAC GFR200-06 Filter Regulator 1/8 in PT, 5 um, Manual |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (PT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — round, psi scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 2 | Gauge scale: psi. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 5 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Clean, regulated air to the gripper and lift cylinders of a carton-packing station. The 5 um element and manual drain suit a cell that is checked and drained as part of each shift routine.
Feeding analytical instruments that use small pneumatic actuations, where the finer 5 um grade helps keep particulate and water out of sensitive components and a low-pressure setting is what the circuit calls for.
Regulated air to light-duty clamp cylinders on a manual assembly fixture, with the round psi gauge giving the operator a clear local reading and the fitted reverse/check valve already in the circuit.
Step through the real choices: size (200/300/400/600) and port (1/8 in PT on this unit) against the air your circuit needs; drain type - differential-pressure (default), automatic (A) or manual (M, this unit); filter grade - 40 um standard or 5 um (W, this unit) where finer filtration is wanted; gauge - embedded square or external round, scaled in MPa, psi or bar (this unit: round, psi). Thread is PT as standard, with G (BSPP) and NPT as order options; brackets are optional and not fitted here. The low-pressure (L) type's setting range is not published as a single figure, so ask us to confirm it against your circuit. Flow is published as curves, not one rating - request confirmation from the datasheet before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for this family as curves, not as a single rated figure, so we do not quote a number. Send us your port size, working pressure and approximate air demand, and we will confirm sizing against the datasheet curves before you order.
This unit is code M: condensate is drained by hand, which suits stations attended on a regular schedule. If the unit sits where nobody drains it routinely, choose automatic (A); the differential-pressure drain is the catalogue default. All three options are decodable from the model code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.