The AirTAC AirTAC GFR200-06T Filter Regulator NPT 1/8 Low-Pressure is a genuine G-series filter regulator: water separation, 40 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT1/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR200-06T is a filter regulator: in one body it removes water and particulate from compressed air and regulates downstream pressure to your setpoint. This 200-size unit has a 1/8 in NPT port, a polycarbonate bowl with manual drain, the standard 40 um filter element, and the low-pressure regulator type. An embedded square gauge reading in bar is fitted, and a reverse/check valve is included. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR series is made in sizes 200, 300, 400 and 600 with ports from 1/8 to 1 in, PT, G(BSPP) or NPT threads, manual, automatic or differential-pressure drains, an optional 5 um element, and MPa, psi or bar gauge scales. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures for your application.
| Model | AirTAC GFR200-06T Filter Regulator NPT 1/8 Low-Pressure |
|---|---|
| Series | GFR200 filter regulator |
| Port size | PT1/8" (NPT thread) |
| Filtering grade | 40 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Fitted (reverse flow permitted) |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR200 | G-series filter regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| (blank) | Mounting bracket included. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | Filtering grade 40 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR200 · PT1/8" · 40 µm |
|---|---|
| One size up | GFR300 |
| Add lubrication | GFC200-06 (two-unit set) |
Filter the shop air supply and hold a reduced, stable pressure to the clamp cylinders so fixture jaws close consistently without over-pressuring the workpiece.
Feed clean, regulated air to carton-sealing and case-erecting cylinders, with the manual drain letting an operator clear accumulated condensate at shift checks.
Supply particulate- and water-filtered air at a low, controlled pressure to analytical instrument cabinets and purge enclosures where gentle pressure is required.
Size the unit by the flow your circuit needs: this 200-size version carries a 1/8 in NPT port, and the 300, 400 and 600 sizes step up in port and flow capacity. Drain type is a real choice: manual drain (this code) means an operator opens the bowl drain, while automatic and differential-pressure drains discharge condensate without attention. The 40 um element is standard; specify code W for the 5 um element. The embedded square gauge here reads bar; MPa and psi scales are available and an external round gauge is optional. Thread on this code is NPT; PT is the AirTAC standard and G(BSPP) is also a catalogue option. A mounting bracket is included. Flow is published as curves, not a single rating, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. The reflux valve permits reverse flow through the unit. A filter regulator adds no oil to the line.
AirTAC publishes flow for the GFR series as curves, not as a single rated figure, so we do not quote a number here. Tell us your application and line pressure and we will confirm the flow and sizing from the datasheet on request.
The L in the code specifies the low-pressure regulator variant rather than the standard one, so the unit is intended for circuits set at reduced pressures. The exact adjustment range of this variant is not published in our data, so we confirm it on request. Everything else on this code is standard: 40 um element, manual drain, square bar gauge, reverse/check valve and NPT 1/8 port.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.