The AirTAC AirTAC GFR300-10 Filter Regulator 3/8 in NPT, 5 um is a genuine G-series filter regulator: water separation, 5 µm particulate filtration and balanced-type pressure regulation combined in a single body. It has PT3/8" ports, a manual drain and regulates 0.05 - 0.9 MPa (7 - 130 psi). It does not lubricate — add a GL lubricator, or order the GFC two-unit set, if downstream equipment needs oil.
The AirTAC GFR300-10 is a filter regulator: one body removes water and particulate from compressed air and regulates downstream pressure. This configuration is a size-300 unit with a 3/8 in NPT port, a 5 um filter element (code W), a manual drain for emptying the bowl, and the low-pressure regulator type. No gauge is fitted and no mounting bracket is supplied. Maximum inlet pressure is 1.0 MPa (145 psi) and the working temperature range is -5 to 70 C (non-freezing).
This is a genuine AirTAC part. The GFR series is available in sizes 200, 300, 400 and 600 with port sizes from 1/8 in to 1 in, a choice of 40 um or 5 um filtration, differential-pressure, automatic or manual drains, gauge options and G (BSPP) or NPT thread variants. Flow is published as curves rather than a single rating, so ask us to confirm datasheet figures for your application.
| Model | AirTAC GFR300-10 Filter Regulator 3/8 in NPT, 5 um |
|---|---|
| Series | GFR300 filter regulator |
| Port size | PT3/8" (NPT thread) |
| Filtering grade | 5 µm |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Low-pressure type |
| Adjusting mechanism | Balanced type |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -5 to +70 °C (unfreeze) |
| Drain type | Manual drain |
| Bowl material | PC |
| Pressure gauge | Not fitted |
| Reflux valve | Not fitted |
Specifications follow the official AirTAC G-series air-preparation data. The regulating band is set by the drain type: automatic and differential-pressure drains regulate 0.15 - 0.9 MPa, a manual drain regulates 0.05 - 0.9 MPa. The low-pressure type adjusts over a lower band than standard; we confirm the exact figures from the factory datasheet. Air must not freeze in the unit. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
| GFR300 | G-series filter regulator, 300 body — sets the port range. |
|---|---|
| 10 | Port size PT3/8". This body offers 08 = PT1/4", 10 = PT3/8", 15 = PT1/2". |
| M | Drain: Manual drain — this also sets the regulating band (0.05 - 0.9 MPa (7 - 130 psi)). |
| L | Low-pressure type. Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| N | No pressure gauge (N). |
| (blank) | Gauge shape: Factory standard. C is round, F is square. |
| (blank) | Gauge scale: Factory standard. 1 is MPa, 2 is psi, 3 is bar. |
| W | Filtering grade 5 µm. Only 40 µm (blank) and 5 µm (W) exist. |
| T | NPT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, drain, type, bracket, gauge, shape, scale, grade, thread, reflux — a blank position takes the default. Example: GFR300-08 is a 300 body, PT1/4", differential drain, standard type, bracket included, gauge fitted, 40 µm, PT thread, no reflux valve.
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom. The GFR600 uses an aluminium-alloy bowl; the 200, 300 and 400 bodies use PC.
| This model | GFR300 · PT3/8" · 5 µm |
|---|---|
| One size down | GFR200 |
| One size up | GFR400 |
| Add lubrication | GFC300-10 (two-unit set) |
Point-of-use conditioning for a packaging machine's cylinder and valve circuit: the 5 um element catches water and particles before they reach seals, while the regulator holds a steady supply pressure to the machine's air logic.
Feeding clamping cylinders on a small pneumatic press or fixture: filtered, regulated air keeps clamp force repeatable from cycle to cycle, and the manual drain lets an operator clear accumulated water at shift start.
Supplying a laboratory or test-bench circuit that needs clean, regulated air: the low-pressure regulator type suits circuits run below standard line pressure, and the 5 um grade helps protect sensitive instruments and fittings.
Size and port step up together: this unit is size 300 with a 3/8 in NPT port, and larger sizes carry larger ports and more flow capacity. The drain here is manual - open it periodically to empty the bowl; automatic or differential-pressure drains are available if you prefer not to rely on an operator. Filtration is 5 um (code W) instead of the standard 40 um - choose 5 um where downstream equipment needs finer protection. No gauge is fitted; gauge options with different scales can be ordered. Thread is NPT here; PT is the standard thread and G (BSPP) is also a catalogue option. No mounting bracket is supplied - brackets are optional. The exact regulation range for the low-pressure type is not published, so confirm it with us. Flow is published as curves, not a single rated figure, so ask us to confirm sizing against your application before ordering.
Quick checklist
The PC bowl must not be cleaned with solvents — wipe it with a dry cloth. Without the K option, air cannot flow back through the unit. A filter regulator adds no oil to the line.
AirTAC publishes GFR flow as curves rather than a single rated figure, so we do not quote a number here. Tell us your application and we will confirm the flow and datasheet figures for the GFR300-10 on request.
This unit has a manual drain: open it periodically to expel water collected in the bowl. If you would rather not rely on an operator, the same size is available with an automatic or differential-pressure drain - just ask for the alternative code.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models usually ship in 3-4 days.
Most inquiries answered within 7-8 hours.
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.