AirTAC GR200-06 Pressure Regulator (GR20006JC1K)
The AirTAC AirTAC GR200-06 Pressure Regulator (GR20006JC1K) is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/8" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/8"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Pressure typeStandard type
- Pressure gaugeFitted
- Reflux valveFitted
- ThreadPT
- BracketSupplied without bracket
About the AirTAC GR200-06 Pressure Regulator (GR20006JC1K)
The GR20006JC1K is an AirTAC GR-series air pressure regulator in the 200 size with a 1/8 inch PT port, fitted with the K reverse/check valve option. It regulates downstream pressure only - there is no filter, bowl or lubricator in this family - with a standard adjustment range of 0.05-0.9 MPa (7-130 psi), a maximum inlet pressure of 1.0 MPa (145 psi) and a working temperature range of -20 to 70 C. The J selects the no-bracket option and C1 provides an external round gauge on an MPa scale.
This is a genuine AirTAC part. The GR series covers 200/300/400/600 sizes with 1/8 to 1 inch ports, G (BSPP) and NPT thread options, a low-pressure type (L) up to 0.4 MPa, and panel-mountable bodies; the check valve is ordered as the K option. Flow appears in the catalogue as curves, so we confirm flow and datasheet details on request.
AirTAC GR200-06 Pressure Regulator (GR20006JC1K) Technical Specifications
| Model | AirTAC GR200-06 Pressure Regulator (GR20006JC1K) |
|---|---|
| Series | GR200 pressure regulator |
| Port size | PT1/8" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — round, MPa scale |
| Reflux valve | Fitted (reverse flow permitted) |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GR200-06 Pressure Regulator (GR20006JC1K)
| GR200 | G-series pressure regulator, 200 body — sets the port range. |
|---|---|
| 06 | Port size PT1/8". This body offers 06 = PT1/8", 08 = PT1/4". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| C | Gauge shape: Round. C is round, F is square. |
| 1 | Gauge scale: MPa. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| K | Reverse-flow (reflux) valve fitted. |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR200 · PT1/8" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size up | GR300 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GR200-06 Pressure Regulator (GR20006JC1K) Is Used
Pneumatic circuit with a held downstream branch
Regulate a branch where the K check valve is specified in the circuit design, keeping the regulator-and-valve pairing the schematic calls for on a 1/8 inch supply line.
Guide-rail and gate cylinders on conveyor lines
Set consistent pressure for line guides, stop gates and diverters so product handling stays gentle and repeatable along the conveyor.
Pilot-air control skids built to order
Drop into assembled control skids where the engineer has specified a regulator with a check valve and a no-bracket, panel-integrated installation.
Is the AirTAC GR200-06 Pressure Regulator (GR20006JC1K) the Right Regulator?
Use this code when you want the 200-size regulator's 1/8 inch port plus the K reverse/check valve and a no-bracket (J) build with an external round MPa gauge. If you do not need the check valve, choose the same code without K; if you want the bracket, drop the J. Gauge alternatives are the embedded square gauge or a round gauge on psi (2) or bar (3) scale. PT is the standard thread; G (BSPP) and NPT are orderable options. Flow is published as curves rather than a single rating, so let us confirm sizing from the datasheet for your application before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/8" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.9 MPa (7 - 130 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
The reflux valve lets air flow back through the regulator, which is useful when downstream volume must vent quickly. A regulator does not remove water or particulate; that is the filter's job.
AirTAC GR200-06 Pressure Regulator (GR20006JC1K) FAQ
AirTAC states GR flow as curves, not as a single rated number, so we do not quote a rated flow here. Send us your flow and pressure conditions and we will confirm the sizing and check-valve details from the datasheet on request.
K is the option that fits a reverse/check valve to the regulator. Codes without the K are supplied without it. If your schematic or application calls for a check valve on the regulator, select the K version; otherwise the plain GR20006JC1 is the equivalent unit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Related AirTAC Air-Preparation Units
Request a Quote for AirTAC GR200-06 Pressure Regulator (GR20006JC1K)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.