AirTAC GR400-15 Pressure Regulator (GR40015JF3)
The AirTAC AirTAC GR400-15 Pressure Regulator (GR40015JF3) is a genuine G-series air pressure regulator. It holds a stable downstream pressure over the range 0.05 - 0.9 MPa (7 - 130 psi) with PT1/2" ports, and ships with a pressure gauge. A regulator does not filter the air — put a GF filter upstream, or use a GFR filter regulator, when water and particulate must also be removed.
- TypePressure regulator
- Port sizePT1/2"
- Regulating range0.05 - 0.9 MPa (7 - 130 psi)
- Pressure typeStandard type
- Pressure gaugeFitted
- Reflux valveNot fitted
- ThreadPT
- BracketSupplied without bracket
About the AirTAC GR400-15 Pressure Regulator (GR40015JF3)
The GR40015JF3 is an AirTAC G-series air pressure regulator: pressure regulation only, with no filter bowl and no lubricator. This 400-size unit carries a 1/2 in PT port and an embedded square pressure gauge reading in bar. It reduces and holds downstream pressure for actuators and air tools, with a set-point range of 0.05-0.9 MPa. The medium is compressed air, with a maximum working (inlet) pressure of 1.0 MPa (145 psi) and an operating temperature range of -20 to 70 C (non-freezing).
This is a genuine AirTAC part. The GR series spans sizes 200, 300, 400 and 600, with a choice of port sizes, square or round external gauges, MPa/psi/bar scales, a low-pressure version and an optional reverse (check) valve; the J code here means no mounting bracket is fitted, and the body is also panel-mountable. Flow is published as curves rather than a single rating, so ask us to confirm sizing and datasheet figures for your application before ordering.
AirTAC GR400-15 Pressure Regulator (GR40015JF3) Technical Specifications
| Model | AirTAC GR400-15 Pressure Regulator (GR40015JF3) |
|---|---|
| Series | GR400 pressure regulator |
| Port size | PT1/2" (PT thread) |
| Regulating range | 0.05 - 0.9 MPa (7 - 130 psi) |
| Pressure type | Standard type |
| Bracket | Supplied without bracket |
| Fluid | Compressed air |
|---|---|
| Max. working pressure | 1.0 MPa (145 psi) |
| Temperature range | -20 to +70 °C |
| Pressure gauge | Fitted — square, bar scale |
| Reflux valve | Not fitted |
| Mounting | Panel mounting; optional fixing bracket |
Specifications follow the official AirTAC G-series air-preparation data. Note the GR temperature range is -20 to +70 °C, wider than the other G-series units. A regulator has no bowl and no filter element, so there is no filtering grade. Flow curves, weight and outline dimensions are not published in our data set — ask us and we will confirm from the factory datasheet.
Model Code: AirTAC GR400-15 Pressure Regulator (GR40015JF3)
| GR400 | G-series pressure regulator, 400 body — sets the port range. |
|---|---|
| 15 | Port size PT1/2". This body offers 10 = PT3/8", 15 = PT1/2". |
| (blank) | Standard type — 0.05 - 0.9 MPa (7 - 130 psi). Blank is standard, L is the low-pressure type. |
| J | Supplied without bracket. |
| (blank) | Pressure gauge fitted (blank). |
| F | Gauge shape: Square. C is round, F is square. |
| 3 | Gauge scale: bar. 1 is MPa, 2 is psi, 3 is bar. |
| (blank) | PT thread. PT is the default; G is BSPP and T is NPT. |
| (blank) | No reverse-flow valve (the default). |
Field order is size, port, type, bracket, gauge, gauge shape, scale, thread, reflux — a blank position takes the default. Example: GR300-08LNK is a 300 body, PT1/4", low-pressure type, no gauge, with reflux valve.
Size Class
- GR200PT1/8" - PT1/4"
- GR300PT1/4" - PT1/2"
- GR400PT3/8" - PT1/2"
- GR600PT3/4" - PT1"
A larger body carries a larger port and holds set pressure better as flow rises. AirTAC publishes flow only as curves, so size the body from your peak demand with headroom rather than from a single rated figure.
| This model | GR400 · PT1/2" · 0.05 - 0.9 MPa (7 - 130 psi) |
|---|---|
| One size down | GR300 |
| One size up | GR600 |
| Line order | Filter first, then regulator, then lubricator |
Where the AirTAC GR400-15 Pressure Regulator (GR40015JF3) Is Used
Pneumatic press clamping
Setting a repeatable clamping pressure on the air cylinder of a bench pneumatic press or workholding fixture, so parts are gripped at the same force every cycle.
Packaging line actuators
Feeding regulated air to the pick-and-place cylinders and grippers on a carton-forming or filling line, isolated from swings in the shop-air supply header.
CNC machine air drop
Point-of-use pressure control on the air drop of a CNC machining centre, setting a fixed supply pressure for the tool-change and clamping circuits.
Is the AirTAC GR400-15 Pressure Regulator (GR40015JF3) the Right Regulator?
This is the 400 size in the GR range, with a 1/2 in PT port. Step up to 600 or down to 300/200 to match pipe size and air demand. The set-point range is 0.05-0.9 MPa, and the built-in square gauge reads in bar; choose GR40015JF1 for an MPa-scale gauge or the scale-2 code for psi. Thread is PT as standard, with G (BSPP) and NPT available as catalogue options. The J code means the mounting bracket is not included - request the bracket option if you plan to panel-mount.
Flow for GR regulators is published as curves, not a single rated figure, so we do not quote one number. Tell us your supply pressure, set point and air consumption and we will confirm sizing against the AirTAC datasheet before you order.
Quick checklist
- ✓ Body size for your peak flow (PT1/2" here)
- ✓ Standard 0.9 MPa or low-pressure 0.4 MPa
- ✓ Gauge fitted, or order N without
- ✓ Gauge shape C round / F square
- ✓ Scale MPa (1), psi (2) or bar (3)
- ✓ Reflux valve needed, order K
Installation & Maintenance Notes
- check Install downstream of the filter, following the airflow arrow.
- check Keep inlet pressure at or below 1.0 MPa (145 psi).
- check Set pressure while air is flowing, then lock the knob.
- check Adjust within 0.05 - 0.9 MPa (7 - 130 psi) only.
- check Operating range -20 to +70 °C.
- check Panel-mount or use the fixing bracket; do not hang it on tubing.
Without a reflux valve, air cannot flow back through the regulator — order the K option if reverse flow is required. A regulator does not remove water or particulate; that is the filter's job.
AirTAC GR400-15 Pressure Regulator (GR40015JF3) FAQ
AirTAC publishes GR flow data as curves, not as a single rated figure, so we do not quote one number. Send us your supply pressure, set point and air demand and we will confirm the sizing and flow figures from the datasheet before you order.
Scale 1 gauges read in MPa, scale 2 in psi and scale 3 in bar. GR40015JF3 is supplied with an embedded square gauge reading in bar; choose GR40015JF1 for MPa or the scale-2 code for psi. Thread is PT as standard, with G (BSPP) and NPT available as catalogue options.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for AirTAC GR400-15 Pressure Regulator (GR40015JF3)
Send us the quantity, thread type (PT / G / NPT), gauge scale and destination. We confirm price, availability and lead time — usually within 7-8 hours.