Airtac HLH Side Rail Type Precision Slide Cylinder HLH16x20-S
The AirTAC Airtac HLH Side Rail Type Precision Slide Cylinder HLH16x20-S is a genuine HLH slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a miniature linear roller-ball guide so the table travels straight with high rigidity and low deflection. It delivers about 80.4 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideminiature linear roller-ball guide
- Bore16 mm
- Push thrust @0.5 MPa80.4 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLH Side Rail Type Precision Slide Cylinder HLH16x20-S
A slide-table cylinder pairs an air cylinder with a linear guide so the table moves in a straight path. The HLH series employs a precision miniature linear roller-ball integrated guide built for the best straightness available in the family. Dual rods double the thrust output, while a floating joint protects the rods from side torque so the guide maintains low deflection under load. This bore 16, stroke 20 unit provides moderate thrust for compact precision applications, with four mounting directions and three port groups for installation flexibility.
This is a genuine AirTAC part. A magnet is standard for position detection, and the body includes machined slots for CMSH, DMSH, or EMSH series sensor switches. We verify thrust, dimensions, allowable load, and moment from the AirTAC datasheet or on-page specification table on request.
Airtac HLH Side Rail Type Precision Slide Cylinder HLH16x20-S Technical Specifications
| Model | Airtac HLH Side Rail Type Precision Slide Cylinder HLH16x20-S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLH (miniature linear roller-ball guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 80.4 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 suits setups needing moderate thrust in a precision-guided, compact body. The HLH roller-ball guide is the choice when assembly straightness is the priority. Compare against HLS cross-roller for highest rigidity and load, HLQ ball-bearing for dust-proof anti-rust duty, or HLF for low-height installations. The 20 mm stroke falls within the bore 16 available range. HLH models have no adjuster code; cushioning is bumper-only. Thread is PT. Allowable load, moment, and deflection are published as tables and curves - contact us for sizing confirmation.
Applications
Gripper Traverse Stage
Translates a small gripper between pick and release points with repeatable straightness over a 20 mm guided stroke.
Stopper Actuation
Extends and retracts a stopper pin precisely at a conveyor diverter using the four-way mounting flexibility.
Component Alignment
Nudges a part into final position at an assembly head with minimal deflection and consistent repeatability.
FAQ
Why choose HLH over other HL slide-table guide types?
HLH uses a precision miniature linear roller-ball guide assembled for superior straightness. It provides three port groups and four mounting directions. HLS cross-roller offers the highest rigidity and load, HLQ ball-bearing adds anti-rust dust-proof protection, and HLF cross-roller reduces body height for tight spaces.
Is the magnet standard on the HLH16X20S, and what sensors fit?
Yes, the magnet is standard on every HL slide table; it is not an option to decline. The body has machined slots for CMSH, DMSH, and EMSH series magnetic sensor switches for position detection.