Airtac HLH Side Rail Type Precision Slide Cylinder HLH20X10-S
The AirTAC Airtac HLH Side Rail Type Precision Slide Cylinder HLH20X10-S is a genuine HLH slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a miniature linear roller-ball guide so the table travels straight with high rigidity and low deflection. It delivers about 125.6 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideminiature linear roller-ball guide
- Bore20 mm
- Push thrust @0.5 MPa125.6 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLH Side Rail Type Precision Slide Cylinder HLH20X10-S
The HLH20X10-S is a double-acting dual-rod slide table cylinder integrating an air cylinder with a miniature linear roller-ball guide. The table travels straight with minimal deflection, and the dual rod doubles thrust. A floating joint prevents side torque on the rod. The 20 mm bore provides higher thrust over a short 10 mm stroke.
Genuine AirTAC part with a standard magnet for CMSH, DMSH, or EMSH position-sensing switches. The HLH guide delivers precision-assembly straightness, three port groups, and four mounting directions. We verify thrust, dimensions, and load-moment values from the datasheet or on-page table on request.
Airtac HLH Side Rail Type Precision Slide Cylinder HLH20X10-S Technical Specifications
| Model | Airtac HLH Side Rail Type Precision Slide Cylinder HLH20X10-S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLH (miniature linear roller-ball guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 125.6 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 20 mm bore is the largest in the HLH range, offering the highest thrust in this sub-family over a short 10 mm stroke. The HLH miniature roller-ball guide is selected when straightness and precision assembly are paramount, providing three port groups and four mounting directions. Stroke must be within the bore's table. Thread is PT. We route allowable load and moment sizing to the published Wmax, Emax, and moment tables plus deflection curves.
Applications
Assembly Stage
Indexes a workpiece 10 mm for precision joining using the roller-ball guide's straightness.
Pick-and-Place
Traverses a gripper for short-stroke pick-and-place with rigid dual-rod guidance and low deflection.
Stopper Position
Acts as a precise mechanical stop at a defined 10 mm position on a fixture or assembly jig.
FAQ
What makes the HLH20X10-S guide different from HLS or HLQ slide tables?
HLH uses a miniature linear roller-ball integrated guide for best straightness and precision assembly, with three port groups and four mounting directions. HLS uses a cross-roller guide and HLQ uses a ball-bearing guide; each sub-family has its own thrust table and guide characteristics.
What pressure and speed limits apply to the HLH20X10-S?
Maximum working pressure is 0.7 MPa; the 20 mm bore operates at 0.15-0.7 MPa. Speed range is 50-500 mm/s with meter-out control. We confirm allowable load and moment from the published datasheet tables and deflection curves.