Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X50SAS
1. Dual precision linear guides ensure high accuracy, high rigidity, and integrated rust/dust resistance
2. Pre-machined through-holes on slider for convenient top-side body fixation
3. Built-in locating pin holes on slider for precise alignment
4. Floating joint design prevents piston rods from bearing external torsional loads
5. Double-piston rod configuration delivers doubled output force
6. Integrated locating pin holes on main body for accurate positioning
7. Mounting screw holes on base surface and end faces for flexible installation
Category: Slide Cylinders | Brand: AirTAC | Series: HLQ
AirTAC HLQ16X50SAS Dual-Axis Precision Slide Cylinder Details
- Model: HLQ16X50SAS
- Structure: Dual-axis guided slide with linear bearings
- Shaft diameter: 16mm (hardened steel)
- Stroke: 50mm ±0.2mm
- Repeat positioning accuracy: ±0.01mm
- Max speed: 0.5 m/s (with cushioning)
- Max thrust: 160N (at 0.63MPa)
- Operating pressure: 0.15–0.8 MPa
- Temperature range: -10℃ to 80℃
- Body material: Aluminum alloy (hard anodized)
- Seals: Polyurethane (PU) wear-resistant rings
- Mounting: 4x M4 threaded holes (bottom) + 2x shaft end locknuts
- Weight: 2.8kg (with standard fittings)
- Dimensions: 185mm(L) × 70mm(W) × 70mm(H) (stroke extended)
- Protection rating: IP54 (dust/water spray resistant)
High-rigidity dual-axis slide cylinder featuring zero-backlash ball bushings and precision ground shafts. Integrated oil retention design maintains lubrication for 1M+ cycles. Pre-loaded linear bearings eliminate play during bi-directional movement. Compatible with vacuum environments when paired with optional seals.
- PCB laser marking positioning stages
- Micro-dispensing robot arms in SMT lines
- Optical lens alignment systems
- Precision fixture transfers in watchmaking
- Automated wafer inspection equipment
Installation protocol:
Mount on machined reference surface (flatness ≤0.02mm/mm).
Apply lithium soap grease to guide shafts weekly in high-cycle applications.
Avoid side-load exceeding 30N·m. For vertical use, install counterbalance valve.
| Property | Property Value |
|---|---|
| sku | HLQ16X50SAS |
| External Stop Block Type | Front End Stroke Adjustment Screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | M5×0.8 |
| Magnet | S-Magnetic |
| Bore Diameter | 16mm |
| Stroke | <50mm> |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.