Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X50SB
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X50SB is a genuine HLQ slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X50SB
The AirTAC HLQ16X50SB is a double-acting dual-rod slide-table cylinder with an integrated ball-bearing linear guide. A 16 mm bore and 50 mm stroke deliver moderate thrust for straight-line guided motion; the dual rod doubles the push force while a floating joint spares the rod from side torque. The HLQ ball-bearing guide is anti-rust and dust-proof for clean environments.
This genuine AirTAC part carries a standard magnet for position sensing with CMSH, DMSH, or EMSH switches in the body slots. The B adjuster equips both ends with shock absorbers for smooth deceleration. We verify exact thrust, dimensions, and allowable load-moment from the datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X50SB Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X50SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 16 mm bore suits moderate-thrust guided-slide applications; stepping up to a larger bore increases push force. The HLQ ball-bearing guide is preferred where anti-rust and dust-proof properties matter, versus the higher rigidity of a cross-roller HLS type. The 50 mm stroke fits within the bore 16 range for transfer and positioning tasks. The B adjuster adds shock absorbers at both ends for heavier moving loads or higher cycle speeds, and PT threads match standard fittings. We confirm load and moment sizing from the published tables and deflection curves on request.
Applications
Pick-and-Place Traverse
Moves a suction gripper head in precise straight lines for component placement with shock-absorber cushioning at both ends.
Assembly Stage Index
Indexes a workpiece carrier to an assembly station with ball-bearing straightness and smooth end-of-stroke deceleration.
Lateral Part Transfer
Transfers parts laterally between processing stations with dust-proof guided travel suited to cleanroom adjacency.
FAQ
What does the B adjuster code mean on this slide table?
B indicates shock absorbers installed at both ends of the stroke, providing controlled deceleration for heavier loads or faster cycle speeds than a standard rubber bumper allows.
How is allowable load and moment confirmed for this model?
We confirm allowable load, moment, and kinetic energy from the published AirTAC datasheet tables and deflection curves on request, rather than estimating values in product copy.