Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X75SAF
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X75SAF is a genuine HLQ slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X75SAF
The AirTAC HLQ16X75SAF is a ball-bearing guided slide-table cylinder with a 16 mm bore and 75 mm stroke. As a double-acting dual-rod design, it integrates an air cylinder with a linear ball guide so the moving table travels straight with minimal deflection. The dual rod doubles the thrust for moderate push capacity suited to mid-range transfer tasks, and a floating joint spares the rod from side torque. An adjustable rubber stopper on the retraction side lets you fine-tune end-of-stroke cushioning on the return stroke.
This is a genuine AirTAC part with a standard sintered NdFeB magnet for position sensing; CMSH, DMSH and EMSH switches mount in the body's magnetic-switch slots. We confirm thrust, dimensions, allowable load and moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X75SAF Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X75SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 16 mm bore when you need moderate thrust for small-to-medium workpiece handling; a bigger bore gives more push but adds body size. The HLQ ball-bearing guide is the anti-rust, dust-proof choice when environmental protection matters more than the ultimate rigidity of a cross-roller table. Stroke 75 mm falls within the bore 16 stroke range. The AF adjuster adds an adjustable rubber stopper on the retraction side only; for shock absorption on both ends select the B option instead. Thread is PT (R/BSPP); specify G or NPT if your fittings differ. We confirm allowable load, moment and deflection from the published tables and curves.
Applications
Small-Parts Transfer
Move small components between stations on a conveyor line with anti-rust ball guidance and a retraction-side rubber stopper for controlled return.
Pick-and-Place Head
Traverse a gripper between pick and place positions with straight, low-deflection travel at 75 mm stroke and dual-rod thrust.
Assembly Stage Slide
Index a small sub-assembly into position under a press or driver, using the ball-bearing guide for repeatable straightness.
FAQ
What does the AF adjuster code mean on this HLQ16?
AF indicates an adjustable rubber stopper fitted on the retraction (return) side only. The extension side uses the standard bumper. If you need shock absorbers on both ends, select the B option instead.
What is the maximum operating pressure for this cylinder?
Maximum working pressure is 0.7 MPa (100 psi), with an operating range of 0.15-0.7 MPa (22-100 psi) for the 16 mm bore. Keep meter-out speed at or below 500 mm/s and filter air to 40 um.