Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X75SB
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X75SB is a genuine HLQ slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X75SB
The AirTAC HLQ16X75SB is a ball-bearing guided slide-table cylinder with a 16 mm bore and 75 mm stroke. The double-acting dual-rod design integrates an air cylinder with a linear ball guide for straight, low-deflection travel. Dual rods double the thrust for moderate push capacity, and the floating joint protects the rod from side torque. Shock absorbers on both ends absorb end-of-stroke kinetic energy for smoother deceleration at higher speeds.
This is a genuine AirTAC part with a standard sintered NdFeB magnet for position sensing; CMSH, DMSH and EMSH switches mount in the body's magnetic-switch slots. We confirm thrust, dimensions, allowable load and moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X75SB Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ16X75SB |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 16 mm bore when you need moderate thrust for small-to-medium workpiece handling; a bigger bore gives more push but adds body size. The HLQ ball-bearing guide is the anti-rust, dust-proof choice when environmental protection matters more than the ultimate rigidity of a cross-roller table. Stroke 75 mm falls within the bore 16 stroke range. The B adjuster fits shock absorbers on both extension and retraction ends, absorbing kinetic energy for smoother stops; the B option is available on bore 16 and larger. Thread is PT; specify G or NPT if needed. We confirm allowable load, moment and deflection from the published tables and curves.
Applications
High-Speed Stopper Slide
Stop or position a moving carrier at speed with dual shock absorbers cushioning both stroke ends and ball-bearing straightness.
Pick-and-Place Traverse
Move a vacuum pick-up between pick and place positions with 75 mm stroke, anti-rust guide and dual-rod thrust for stable transfer.
Component Insertion Stage
Slide a small part into an assembly fixture with repeatable guided travel; shock absorbers protect delicate parts on both ends.
FAQ
What does the B adjuster code mean on HLQ16X75SB?
B indicates shock absorbers fitted on both the extension and retraction ends, providing energy absorption for smoother stopping at higher speeds. The B option is available on bore 16 and larger.
How do I confirm allowable load and moment for this slide table?
We confirm allowable load, moment and deflection from the AirTAC published tables and curves. Operating pressure for the 16 mm bore is 0.15-0.7 MPa (22-100 psi); never exceed 0.7 MPa.