Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SA
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SA is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SA
A slide-table cylinder combines an air cylinder with a linear guide so the moving table travels straight. This HLQ20X10SA uses a ball-bearing guide with dual rods, delivering moderate thrust and precise, low-deflection travel across a short 10 mm stroke. The ball-bearing design provides anti-rust and dust-proof protection, and a floating joint protects the rods from side torque while the dual rod doubles the thrust.
This is a genuine AirTAC part. A magnet is standard for position sensing with CMSH, DMSH, or EMSH switches in the body slots. We confirm the exact thrust, dimensions, and allowable load-moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SA Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 provides moderate thrust for compact guided applications. The HLQ ball-bearing guide suits clean to mildly dusty environments where anti-rust and dust-proof operation are valued; choose HLS for higher cross-roller rigidity, HLH for miniature precision straightness, or HLF for a lower body height. The 10 mm stroke works well for clamping or short positioning within the bore 20 range. The A code adds adjustable rubber stoppers at both ends for tunable end-position control. Port threads are PT.
Route load, moment, and kinetic-energy sizing to us; AirTAC publishes Wmax, Emax, and moment tables plus deflection curves for each bore and stroke combination.
Applications
Adjustable Stopper
Use the short 10 mm stroke as a tunable stop with rubber stoppers at both ends for precise end-position control on a parts line.
Short-Stroke Clamp
Clamp or hold workpieces with 10 mm extension, ball-bearing straightness, and adjustable rubber stoppers for consistent clamping force.
Pick-and-Place Transfer
Move small parts a short distance with dual-rod stability and dust-proof ball-bearing guidance for repeatable pick-and-place cycles.
FAQ
What does the A adjuster code add to this model?
The A code installs adjustable rubber stoppers at both ends, letting you fine-tune the end-of-stroke position and cushioning on both extension and retraction sides.
Is the magnet optional on this cylinder?
No, the magnet is standard on the entire HLQ line. The S in the model code confirms a magnet is fitted for position sensing with CMSH, DMSH, or EMSH switches.