Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SAS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SAS is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SAS
The AirTAC HLQ20X10SAS is a double-acting dual-rod slide-table cylinder with an integrated ball-bearing linear guide. The bore 20 mm and 10 mm stroke deliver moderate thrust over a short travel range, while the ball-bearing rail provides smooth, anti-rust, dust-proof guidance with low deflection. A floating joint protects the rods from side torque, and the dual-rod layout doubles the thrust compared with a single-rod cylinder. The AS adjuster adds an adjustable rubber stopper on the extension side.
This is a genuine AirTAC part with a standard sintered NdFeB magnet for position sensing; compatible sensor switches are CMSH, DMSH, and EMSH, which mount in the body slots. We confirm exact thrust, dimensions, and allowable load and moment values from the datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SAS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X10SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose bore 20 for moderate thrust in a compact slide-table footprint; a larger bore gives more push if your application needs it, but never exceed the 0.7 MPa maximum working pressure (operating range for bore 20 is 0.15-0.7 MPa, or 22-100 psi). The HLQ ball-bearing guide suits environments where anti-rust and dust-proof operation matter, whereas HLS cross-roller offers higher rigidity, HLH miniature roller-ball gives best straightness with three port groups, and HLF provides a lower body height. Stroke 10 mm is within the bore 20 range; verify your required travel against the datasheet stroke table. The AS adjuster gives an adjustable rubber stopper on the extension side - choose B or BF if you need shock absorbers instead, and select thread PT, G, or T to match your fittings. We confirm allowable load, moment, and kinetic energy from the published tables and deflection curves when sizing your application.
Applications
Pick-and-Place Head
Mounts a gripper for precise part placement; the ball-bearing guide keeps the tool square to the pick point over short 10 mm strokes.
Small-Parts Transfer
Shuttles components between stations on a production line, where the anti-rust dust-proof guide resists shop-floor contamination.
Assembly Stage Stop
Positions a workpiece or fixture against the adjustable rubber stopper on the extension side for repeatable assembly registration.
FAQ
What does the AS adjuster code mean on this model?
AS indicates an adjustable rubber stopper on the extension side of the slide table. If you need shock absorption instead, choose the B code for both ends or BF for the retraction side only.
What is the maximum operating pressure for the HLQ20X10SAS?
Maximum working pressure is 0.7 MPa. For bore 20, the operating range is 0.15-0.7 MPa (22-100 psi). Keep meter-out speed at or below 500 mm/s, and confirm allowable load and moment from the datasheet tables on request.