Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X150SAF
1. Dual precision linear guides ensure high accuracy, high rigidity, and integrated rust/dust resistance
2. Pre-machined through-holes on slider for convenient top-side body fixation
3. Built-in locating pin holes on slider for precise alignment
4. Floating joint design prevents piston rods from bearing external torsional loads
5. Double-piston rod configuration delivers doubled output force
6. Integrated locating pin holes on main body for accurate positioning
7. Mounting screw holes on base surface and end faces for flexible installation
Category: Slide Cylinders | Brand: AirTAC | Series: HLQ
AirTAC HLQ Series Dual-Axis Precision Slide Cylinder HLQ20X150SAF Specifications
- Model: HLQ20X150SAF
- Type: Dual-axis guided slide cylinder with linear guide rails
- Bore size: 20mm
- Stroke: 150mm (customizable 50-500mm)
- Structure: Aluminum alloy body with chrome-plated steel rods
- Operating pressure: 0.1-0.7 MPa
- Repeat positioning accuracy: ±0.01mm
- Maximum thrust: 63N at 0.5MPa
- Buffer type: Adjustable pneumatic cushioning (both ends)
- Mounting options: Horizontal/Vertical with side or base mounting holes
- Sensor slots: 2x M5 T-slots for magnetic switches
- Weight: 2.5kg (with standard accessories)
- Dimensions: 250mm(L) × 80mm(W) × 60mm(H) (full extension)
- Operating temperature: -20℃ to 80℃
- Lubrication: Pre-lubricated (ISO VG32 compatible)
- Rod end type: Female M6x1.0 threaded
High-rigidity dual-axis cylinder featuring precision-ground linear guides and integrated scraper seals for particulate protection. The staggered piston design eliminates rotational torque while maintaining <0.05mm/m parallel alignment. Includes wear-resistant brass bushings and anti-vibration pads for high-frequency operation (up to 5Hz). Requires 5μm filtered dry air.
- PCB component insertion machines
- Semiconductor wafer handling systems
- Optical lens alignment stations
- Medical device assembly automation
- 3D printing bed leveling mechanisms
Installation protocol:
Apply 0.5Nm torque limit on mounting screws. For vertical installations,
use auxiliary support brackets when payload exceeds 3kg. Perform
re-lubrication every 500km of cumulative travel.
| Property | Property Value |
|---|---|
| sku | HLQ20X150SAF |
| External Stop Block Type | Rear end stroke adjusting screw |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | PT1/8 |
| Magnet | S-Magnetic |
| Bore Diameter | <20mm> |
| Stroke | 150mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.