Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X20SA
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X20SA is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X20SA
The AirTAC HLQ20X20SA is a ball-bearing slide-table cylinder with adjustable rubber stoppers at both ends, combining an air cylinder with a precision linear guide so the table travels straight on anti-rust, dust-proof ball rails. The dual-rod layout doubles thrust and a floating joint isolates the rods from side torque. Bore 20 mm and stroke 20 mm provide higher thrust in a compact body.
This genuine AirTAC part includes a standard magnet for position sensing via CMSH, DMSH, or EMSH switches. We verify thrust, dimensions, and allowable load and moment from the datasheet or on-page table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X20SA Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X20SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 mm gives higher thrust than smaller HLQ bores; select the bore for your thrust need and a stroke within the bore's range. The HLQ ball-bearing guide provides anti-rust, dust-proof travel, while HLS cross-rollers offer greater rigidity. This model adds adjustable rubber stoppers at both ends for fine end-position control beyond the standard bumper. Thread is PT; port size is 1/8 inch. We confirm allowable load, moment, and deflection from the published tables and curves on request.
Applications
Assembly stage stop
Rubber stoppers at both ends position a part-fixture stage repeatably over 20 mm of ball-rail travel.
Small-parts sorter
Dust-proof ball guide pushes components into sorting bins with controlled end contact at each stop.
Probe positioning
Anti-rust slide moves a test probe across 20 mm for repeatable contact-point checks in clean environments.
FAQ
What does the A adjuster code mean on HLQ20X20SA?
The A code adds adjustable rubber stoppers at both ends, letting you fine-tune the end positions beyond the standard bumper cushioning for more controlled end-of-stroke contact.
How do I confirm load and moment capacity for HLQ20X20SA?
Allowable load, moment, and deflection are published as tables and curves in the datasheet. We confirm the exact values for your bore and stroke on request so you can size the guide correctly.