Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X20SAS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X20SAS is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X20SAS
The AirTAC HLQ20X20SAS is a double-acting dual-rod slide-table cylinder that integrates an air cylinder with a ball-bearing linear guide. At bore 20 and stroke 20 mm, the moving table travels straight along the anti-rust, dust-proof ball-bearing rail while the dual rod doubles thrust and a floating joint spares the rod from side torque. This bore delivers higher thrust than smaller bores in the HLQ family.
This is a genuine AirTAC part with a standard magnet fitted for position sensing using CMSH, DMSH, or EMSH switches mounted in the body slots. We confirm thrust, dimensions, and load-moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X20SAS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X20SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose bore 20 when you need more push than a smaller HLQ bore provides, and verify your stroke fits the bore-20 stroke table. The HLQ ball-bearing guide suits environments where anti-rust and dust-proof operation matter; for highest rigidity consider the HLS cross-roller, and for reduced height look at HLF. This model carries an AS adjuster (adjustable rubber stopper on the extension side) and PT threads. Route allowable load and moment sizing to us - they are published as tables and deflection curves.
Applications
Pick-and-Place Head
Mounts a gripper for precise part placement on a 20 mm stroke with low deflection guided travel.
Small-Parts Transfer
Shifts lightweight components between stations with the ball-bearing guide keeping travel straight and smooth.
Assembly Stage Stopper
Positions a workpiece at an assembly station where the extension-side rubber stopper sets a repeatable end position.
FAQ
What does the AS adjuster code mean on HLQ20X20SAS?
AS indicates an adjustable rubber stopper on the extension side only. The retraction side uses the standard bumper cushion.
What is the maximum working pressure for this cylinder?
The maximum working pressure is 0.7 MPa. Operating range for bore 20 is 0.15-0.7 MPa (22-100 psi). Meter-out speed control should keep travel between 50 and 500 mm/s.