Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X30SBS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X30SBS is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X30SBS
The AirTAC HLQ20X30SBS is a double-acting dual-rod slide-table cylinder pairing an air cylinder with a ball-bearing linear guide. The 20 mm bore at 30 mm stroke provides moderate thrust and straight guided travel with low deflection. The dual rod doubles the thrust, and a floating joint prevents side torque on the rod. The ball-bearing guide is anti-rust and dust-proof for clean or mildly contaminating environments.
This is a genuine AirTAC part with a standard magnet for position sensing using CMSH, DMSH, or EMSH switches. We confirm thrust, dimensions, and allowable load or moment from the manufacturer datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X30SBS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X30SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 20 mm bore suits applications needing moderate thrust at this guide width; a larger bore increases push but adds bulk. The HLQ ball-bearing guide is ideal where anti-rust and dust-proof properties are priorities. This model carries a shock absorber on the extension side (BS code) for smoother deceleration at the extend end; choose B for both-end shock absorption if impact loads occur in both directions. Confirm the stroke falls within the bore 20 catalog range. Thread is PT; G or NPT can be specified. We can verify allowable load, moment, and kinetic energy against the published Wmax, Emax, and moment tables and deflection curves.
Applications
Pick-and-Place Traverse
Moves a gripper along a precise path with dust-proof ball-bearing guidance.
Gripper Traverse
Slides a gripper between pick and place positions with shock-absorber end control on extend.
Component Feeder Index
Indexes small parts to a pickup point with anti-rust guided travel.
FAQ
What does the BS adjuster code mean?
BS means a shock absorber on the extension side only. If impact occurs at both stroke ends, choose B for shock absorbers at both ends. The A code gives adjustable rubber stoppers instead. B-type adjusters are available on bore 20 and above.
How fast can the HLQ20X30SBS travel?
Speed should be controlled by meter-out flow between 50 and 500 mm/s. Maximum working pressure is 0.7 MPa (100 psi), with an operating range of 0.15-0.7 MPa (22-100 psi) for the 20 mm bore. Proof pressure is 1.2 MPa (175 psi).