Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ20X75SBS
1. Dual precision linear guides ensure high accuracy, high rigidity, and integrated rust/dust resistance
2. Pre-machined through-holes on slider for convenient top-side body fixation
3. Built-in locating pin holes on slider for precise alignment
4. Floating joint design prevents piston rods from bearing external torsional loads
5. Double-piston rod configuration delivers doubled output force
6. Integrated locating pin holes on main body for accurate positioning
7. Mounting screw holes on base surface and end faces for flexible installation
Category: Slide Cylinders | Brand: AirTAC | Series: HLQ
AirTAC HLQ Series Dual-Axis Precision Slide Cylinder HLQ20X75SBS
- Model: HLQ20X75SBS
- Structure: Dual-axis guided slide cylinder with integrated linear guide
- Bore size: 20mm
- Stroke: 75mm (standard), customizable up to 300mm
- Operating pressure: 0.05-0.8 MPa
- Max. speed: 500mm/s (with cushioning)
- Repeat positioning accuracy: ±0.01mm
- Guide type: High-precision linear ball bearings
- Max. load capacity:
- Radial: 50N
- Moment: 3.5N·m
- Seal material: Polyurethane/NBR compound seals
- Temperature range: -10℃ to 80℃
- Port size: M5x0.8 (dual ports for push/pull operation)
- Mounting options: Horizontal/Vertical/Inverted with 4x M4 threaded holes
- Weight: 1.2kg (excluding accessories)
- Dimensions:
- Length: 190mm (including stroke)
- Width: 42mm
- Height: 42mm
High-rigidity dual-axis slide cylinder combining pneumatic actuation with precision linear guidance. Features anti-creep design with adjustable cushioning at both ends, optimized for smooth start/stop transitions. The anodized aluminum body resists corrosion while maintaining lightweight properties (60% lighter than steel equivalents). Integrated T-slot design allows direct mounting of tooling plates.
- Precision positioning in semiconductor wafer handling
- Vertical lift mechanisms in automated test equipment
- Optical component alignment systems
- High-speed pick-and-place operations (≤3Hz cycle rate)
- Micro-dispensing robot arms
Installation note:
Requires periodic lubrication (ISO VG32 hydraulic oil recommended) every 500km of travel.
Avoid side-impact loads exceeding 30N. For vertical installations, use counterbalance valves
and perform laser alignment calibration.
| Property | Property Value |
|---|---|
| sku | HLQ20X75SBS |
| External Stop Block Type | Front Hydraulic Shock Absorber |
| Understood. Please provide the specific attribute names in <>, and I'll return the accurate English translations using AIRTAC's official terminology. Example: User input: <缸径> My output: Bore | Operating Temperature: -20-70°C Speed Range: 50-500 mm/s |
| Port Size | PT1/8 |
| Magnet | S-Magnetic |
| Bore Diameter | <20mm> |
| Stroke | 75mm |
Returns will be accepted for up to 15 days of Customer’s receipt or tracking number on Not used items. You, as a Customer, are obliged to inform us via email before you return the item, only in the case of:
- Received the wrong item.
- Item arrived not as expected (ie. damaged packaging).
- Item had defects.
- Over delivery time.
- The shipper does not allow the goods to be inspected before payment.
The returned product(s) must be in the original packaging, safety wrapped, undamaged and unworn. This means that the item(s) must be safely packed in a carton box for protection during transport, possibly the same carton used to ship to you as a customer.