Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SA
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SA is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SA
The AirTAC HLQ25X10SA is a double-acting dual-rod slide-table cylinder integrating an air cylinder with a ball-bearing linear guide for straight travel and low deflection. At bore 25 and a short 10 mm stroke, the dual rod doubles the thrust for a bigger bore while a floating joint protects the rod from side torque.
This genuine AirTAC part is magnet-fitted as standard, with magnetic-switch slots on the body for CMSH, DMSH, or EMSH sensors. We confirm the exact thrust, dimensions, and allowable load-moment from the datasheet or on-page table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SA Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 25 mm bore gives higher thrust from the HLQ ball-bearing sub-family, chosen for anti-rust and dust-proof operation. The 10 mm stroke is a short travel option within the bore's standard stroke table. The A adjuster provides an adjustable rubber stopper on both ends. Ports are 1/8". For allowable load, moment, or kinetic energy sizing, we rely on the published tables and deflection curves.
Applications
Stopper Mechanism
Acts as a short-travel stopper on a precision fixture, using the rubber stopper to halt a workpiece cleanly.
Small-Parts Transfer
Shifts small components a short 10 mm distance between operations with the ball-bearing guide ensuring repeatable position.
Clamp Actuation
Extends briefly to clamp a part in a fixture, where the dual rod provides stable thrust without deflecting the guide.
FAQ
What does the A in HLQ25X10SA stand for?
A means the slide table includes an adjustable rubber stopper on both ends, allowing you to fine-tune the end-of-stroke position manually.
How fast can this cylinder cycle?
The standard speed range is 50-500 mm/s. You should use meter-out speed control and keep the operating pressure within 0.15-0.7 MPa (22-100 psi) for bore 25.