Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SAS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SAS is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SAS
A slide-table cylinder integrates an air cylinder with a linear guide so the moving table travels straight. This HLQ25X10SAS model uses a ball-bearing guide for anti-rust, dust-proof operation, with a 25mm bore and 10mm stroke for higher thrust. The dual-rod design doubles the push, while a floating joint spares the rods from side torque.
This is a genuine AirTAC part with a standard magnet for sensor switches CMSH/DMSH/EMSH. We confirm exact thrust, dimensions, and load-moment from the datasheet or on-page table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SAS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose this 25mm bore for higher thrust. The ball-bearing guide (HLQ) is selected over cross-roller (HLS) when anti-rust and dust-proofing are priorities. Stroke fits within the bore table. This model includes an adjustable rubber stopper on the extension side (AS). Thread is PT. We route load and moment sizing to published tables and curves on request.
Applications
Pick-and-Place
Moves components precisely along the ball-bearing guide during automated assembly processes.
Small-Parts Transfer
Shifts items cleanly between conveyors with minimal deflection and dust-proof reliability.
Gripper Traverse
Slides a gripper head forward and back to handle workpieces accurately without side torque.
FAQ
What does the AS adjuster mean on this slide table?
The AS code specifies an adjustable rubber stopper on the extension side of the cylinder, allowing you to fine-tune the forward end-stop position.
What is the maximum operating pressure for this bore?
The maximum working pressure is 0.7 MPa, with an operating range of 0.15-0.7 MPa for the 25mm bore.