Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SBS
The AirTAC Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SBS is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SBS
The AirTAC HLQ25X10SBS is a double-acting dual-rod slide-table cylinder that integrates an air cylinder with a ball-bearing linear guide, so the moving table travels straight with low deflection. The dual rod doubles thrust for the 25 mm bore at this 10 mm stroke, and a floating joint spares the rod from side torque. This HLQ sub-family uses a ball-bearing guide that is anti-rust and dust-proof, suited to environments where clean guided motion matters.
This is a genuine AirTAC part. A magnet is standard, and sensor switches CMSH, DMSH, or EMSH fit the magnetic-switch slots on the body. We confirm the exact thrust, dimensions, and allowable load-moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SBS Technical Specifications
| Model | Airtac HLQ Dual-Axis Precision Slide Table Cylinder HLQ25X10SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 25 mm bore when the application needs higher thrust than smaller bores provide - the bigger bore delivers more push without needing a separate Newton figure here (the spec table carries the verified value). The HLQ ball-bearing guide is the right pick when anti-rust and dust-proof operation matter more than the maximum rigidity of the HLS cross-roller type. Stay within the bore's published stroke range when ordering.
This model carries a BS adjuster, meaning a shock absorber on the extension side for end-of-stroke deceleration. Thread is PT (metric taper). For allowable load and moment sizing we route you to the published tables and deflection curves rather than estimating here.
Applications
Pick-and-Place Head
Mounts a vacuum gripper or small jaw to traverse parts between stations with straight, low-deflection ball-guided travel.
Small-Parts Transfer
Pushes lightweight components across a conveyor lane or into a nest using the dual-rod thrust and dust-proof guide.
Gripper Traverse
Shuttles a gripper assembly sideways between two pick points, relying on the ball-bearing guide for repeatable positioning.
FAQ
What does the BS suffix mean on this HLQ25 model?
BS indicates a shock absorber fitted on the extension side of the slide table, providing end-of-stroke cushioning on the outward stroke only. The retraction side uses a standard bumper. Shock-absorber adjusters are available on HLQ bores 8 and above; bore 6 does not offer B-type adjusters.
What is the maximum operating pressure for the 25 mm bore?
Maximum working pressure is 0.7 MPa (100 psi) and must never be exceeded. The operating range for bore 25 is 0.15-0.7 MPa (22-100 psi). Proof pressure is 1.2 MPa (175 psi). Meter-out speed control keeps travel between 50 and 500 mm/s.