The AirTAC AirTAC HLQ25X40SAS Ball-Bearing Slide Cylinder Bore 25 is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. A floating joint spares the rod from side torque; the magnet is fitted as standard.
The AirTAC HLQ25X40SAS is a double-acting dual-rod slide-table cylinder integrating an air cylinder with a ball-bearing linear guide for straight, low-deflection table travel. The dual-rod layout doubles thrust for the bore, and the floating joint isolates the rods from side torque. At bore 25 mm and stroke 40 mm, this HLQ ball-bearing table adds an adjustable rubber stopper on the extension side for finer end-position control, with anti-rust and dust-proof properties for harsher environments.
This genuine AirTAC part includes a standard magnet for position sensing via CMSH, DMSH, or EMSH switches in the body slots. We verify thrust, overall dimensions, and allowable load/moment against the AirTAC datasheet or on-page spec table on request.
| Model | AirTAC HLQ25X40SAS Ball-Bearing Slide Cylinder Bore 25 |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQ (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
Bore 25 provides higher thrust than smaller bores in the HLQ ball-bearing family; choose the bore matching your push requirement - the spec table carries the exact value. The HLQ guide excels in anti-rust, dust-proof settings; HLS cross-roller offers more rigidity, HLH gives precision straightness with three port groups, and HLF reduces body height. This model adds an adjustable rubber stopper on the extension side (AS code) for finer control of the forward end position; the retraction side uses the standard bumper. Thread is PT; G or NPT on request. We reference the published AirTAC load, moment, and deflection tables and curves for sizing.
Carry a gripper across a 40 mm stroke with the extension-side rubber stopper providing a tuned forward end position for consistent part release.
Sort small parts in a dust-prone area where the anti-rust ball-bearing guide keeps the table moving straight despite particulate exposure.
Act as a short-stroke feed pusher that advances a workpiece into a fixture, with the adjustable stopper fine-tuning the feed distance.
The AS code indicates an adjustable rubber stopper on the extension side. This lets you fine-tune the forward end position without changing the stroke. The retraction side uses the standard rubber bumper. Other adjuster options include A (both ends), B (shock absorber both ends), BS (shock absorber extension side), and AF or BF (retraction side). B-type adjusters are not available on bore 6.
Maximum working pressure is 0.7 MPa (100 psi), never higher. Proof pressure is 1.2 MPa (175 psi). Operating pressure for bore 25 is 0.15-0.7 MPa (22-100 psi). Use meter-out speed control to keep travel within 50-500 mm/s. We verify load, moment, and deflection from the AirTAC datasheet on request.