Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X75SA
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X75SA is a genuine HLQ slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X75SA
The AirTAC HLQL12X75SA is a symmetrical ball-bearing slide-table cylinder with a 12 mm bore and 75 mm stroke, fitted with adjustable rubber stoppers at both ends. As a double-acting dual-rod slide table, it integrates an air cylinder with a linear ball-bearing guide so the moving table travels straight with minimal deflection. The dual rod doubles the thrust for a bigger push at this bore, and a floating joint spares the rod from side torque. The ball-bearing guide adds anti-rust and dust-proof properties suited to clean or varied environments.
This is a genuine AirTAC part with a standard magnet for position sensing. Compatible sensor switches include CMSH, DMSH, and EMSH series, which seat in the magnetic-switch slots on the body. We confirm exact thrust, dimensions, and allowable load-moment values from the datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X75SA Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X75SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 12 sits in the moderate-thrust range; stepping up to bore 16 or 20 gives a higher push if your application needs it, while staying within the bore's stroke table. The HLQL ball-bearing guide is chosen where anti-rust and dust-proof performance matter, and the symmetrical layout suits tighter mounting constraints. The A adjuster code adds adjustable rubber stoppers at both ends for finer end-position control beyond the standard bumper. Thread is PT. For load and moment sizing, we reference the published Wmax, Emax, and moment tables and deflection curves.
Applications
Gripper Traverse
Moves a pneumatic gripper along a 75 mm path with adjustable rubber stops for repeatable end positions.
Stopper Mechanism
Acts as a guided stopper for small workpieces on a line, with rubber stoppers tuned for soft contact at both ends.
Lateral Parts Push
Pushes lightweight components sideways between stations with straight, dust-proof ball-bearing guidance.
FAQ
What does the SA in HLQL12X75SA indicate?
S confirms the standard magnet is fitted. A is the adjuster code, meaning adjustable rubber stoppers are added at both ends for finer end-position control beyond the basic bumper cushion.
What pressure and speed range applies to this model?
For bore 12 the operating pressure range is 0.15-0.7 MPa (22-100 psi), with a maximum working pressure of 0.7 MPa. Speed is 50-500 mm/s under proper meter-out control. Load and moment limits are confirmed from the datasheet.