Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X75SBS
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X75SBS is a genuine HLQ slide-table cylinder, 12 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 85 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore12 mm
- Push thrust @0.5 MPa85 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X75SBS
The AirTAC HLQL12X75SBS is a symmetrical ball-bearing guided slide-table cylinder that integrates an air cylinder with a linear guide so the moving table travels straight and true. The dual rod doubles thrust while a floating joint spares the rod from side torque, making this bore 12 / stroke 75 mm unit a solid choice for precise guided transfer where moderate push is needed. The ball-bearing guide is anti-rust and dust-proof, and the symmetrical body suits centrally loaded applications.
This is a genuine AirTAC part. The magnet is standard, and sensor switches CMSH, DMSH, or EMSH fit the magnetic-switch slots on the body. We confirm thrust, dimensions, load, and moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X75SBS Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL12X75SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 12 mm |
| Push thrust @0.5 MPa | 85 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 12 sits in the 0.15-0.7 MPa operating range and delivers moderate thrust; choose a larger bore if your application needs more push. The HLQL ball-bearing guide is the right pick when anti-rust and dust-proof operation matter more than the maximum rigidity of a cross-roller guide. The BS adjuster code means a shock absorber on the extension side, which softens end-of-stroke impact on that end. Thread is PT (tapered) as standard.
Stroke 75 mm falls within the bore 12 stroke table. For load and moment sizing we reference the published AirTAC tables and deflection curves to confirm suitability for your workpiece.
Applications
Small-Parts Pick-and-Place
Guided symmetrical table positions tiny electronic components with low deflection and dust-proof ball bearings for clean handling.
Stop-and-Transfer Gate
Stops and diverts small items on a conveyor with shock-absorber cushioning on the extension side to reduce impact at the transfer point.
Gripper Traverse Stage
Moves a gripper head horizontally between two pickup positions using the floating joint to protect the dual rods from torque.
FAQ
What does the BS adjuster code mean on HLQL12X75SBS?
BS indicates a shock absorber fitted on the extension side only. The other end uses the standard bumper cushion. This softens impact when the table fully extends but does not add cushioning on the retraction side.
What is the maximum working pressure for bore 12?
The maximum working pressure is 0.7 MPa (100 psi). Bore 12 operates from 0.15 to 0.7 MPa. Proof pressure is 1.2 MPa, but 0.7 MPa is never exceeded in service.