Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X125S
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X125S is a genuine HLQ slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X125S
The AirTAC HLQL16X125S is a symmetrical ball-bearing slide-table cylinder that integrates a double-acting dual-rod air cylinder with a linear ball guide. The 16 mm bore and 125 mm stroke deliver moderate thrust over a long, precise travel path, while the dual rod doubles the push and pull force and the floating joint protects the rod from side torque. The symmetrical body allows mounting on either side without handedness concerns.
This is a genuine AirTAC part fitted with a standard magnet for position sensing via CMSH, DMSH, or EMSH series switches installed in the body slots. The ball-bearing guide is anti-rust and dust-proof, suited to clean or mildly corrosive environments. We confirm exact thrust, dimensions, allowable load, and moment values from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X125S Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X125S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 16 mm bore when you need moderate thrust across a long 125 mm stroke; a larger bore in the HLQL range gives proportionally more push without changing the ball-bearing guide characteristic. The HLQL symmetrical ball-bearing guide suits applications requiring anti-rust, dust-proof performance and smooth low-friction travel; choose HLS for maximum rigidity with cross-rollers or HLF when a lower body height is needed. This model uses the basic bumper cushion and PT thread ports.
For adjustable stop options on the HLQL series, select A for rubber stoppers at both ends, AF for the retraction side only, or AS for the extension side only; shock-absorber variants (B/BS/BF) are available on bore 16 and above. We route allowable load, moment, and deflection sizing to the published tables and curves so you get a verified fit for your application.
Applications
Pick-and-Place Traverse
Guides a small gripper across a 125 mm stroke for precise component placement on an assembly line.
Small-Parts Transfer
Moves lightweight parts between stations with smooth ball-bearing travel over a long guided path.
Assembly Stage Index
Positions a workpiece or fixture at a repeatable endpoint for a joining or pressing operation.
FAQ
What cushion does the HLQL16X125S use?
This model has the basic bumper cushion at both ends. If you need adjustable rubber stoppers, order the A variant for both ends, AS for extension side, or AF for retraction side; shock-absorber options (B/BS/BF) start at bore 16.
What is the maximum working pressure for this bore?
Maximum working pressure is 0.7 MPa (100 psi) with an operating range of 0.15-0.7 MPa (22-100 psi) for the 16 mm bore. Never exceed 0.7 MPa; proof pressure is 1.2 MPa for validation only.