Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X125SBF
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X125SBF is a genuine HLQ slide-table cylinder, 16 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 151 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore16 mm
- Push thrust @0.5 MPa151 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X125SBF
The AirTAC HLQL16X125SBF is a symmetrical ball-bearing slide-table cylinder that combines a dual-rod air cylinder with a linear ball guide for precise, straight travel. The ball-bearing guide resists rust and blocks dust at bore 16 and stroke 125. Dual rods deliver higher thrust and the floating joint protects the rod from side torque. The symmetrical body enables balanced installation.
This is a genuine AirTAC part with a standard magnet for position sensing using CMSH, DMSH, or EMSH switches in the body slots. We confirm the exact thrust, dimensions, and allowable load/moment values from the datasheet or on-page spec table on request so you get verified numbers for your application.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X125SBF Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL16X125SBF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 16 mm |
| Push thrust @0.5 MPa | 151 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 16 provides moderate thrust; move to a larger bore for more push. The HLQL ball-bearing guide suits anti-rust, dust-proof applications where HLS cross-roller rigidity is not required. Stroke 125 is within the bore 16 table. The BF adjuster places a shock absorber on the retraction side only for controlled deceleration on the return stroke. Ports are PT thread.
Applications
Return-Stroke Ejector
Ejects finished parts on the retraction stroke with shock-absorber deceleration to prevent bounce on a machining cell.
Test Fixture Slide
Positions a test probe against a component with anti-rust ball-bearing guidance for repeatable contact in humid test environments.
Stopper Adjustment Stage
Moves an adjustable stopper block into and out of a parts flow path with low-deflection guided precision.
FAQ
What does BF mean in the HLQL16X125SBF model code?
BF indicates a shock absorber on the retraction side only. The return stroke gets controlled hydraulic deceleration while the extension side uses the standard bumper. This is useful when the return stroke carries a heavier load or moves faster.
How do I confirm load and moment capacity for this slide table?
We confirm allowable load, moment, and kinetic energy from the published datasheet tables and deflection curves on request. These values are bore and stroke specific, so always verify against the current spec sheet for your mounting orientation.