Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SA
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SA is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SA
The HLQL20X100SA is a symmetrical double-acting dual-rod slide-table cylinder pairing an air cylinder with a ball-bearing linear guide for straight, low-deflection travel. At bore 20 and stroke 100 mm it provides moderate thrust for general guided tasks; the dual rod doubles that thrust and a floating joint isolates the rod from side torque. The A adjuster adds adjustable rubber stoppers at both ends so you can fine-tune end positions without extra external hardware.
This is a genuine AirTAC part with a standard sintered NdFeB magnet for position sensing. Sensor switches CMSH, DMSH, and EMSH seat in the magnetic-switch slots on the body. We confirm exact thrust, dimensions, and allowable load-moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SA Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 gives moderate push force; stepping up the bore increases thrust without losing guide precision. The HLQL ball-bearing sub-family is selected over HLS cross-roller when anti-rust and dust-proof properties are priorities, and the symmetrical body helps when mounting space is limited on one side. Stroke 100 mm is within the bore 20 stroke table.
The A adjuster provides adjustable rubber stoppers at both extension and retraction ends, useful when you need repeatable end positioning beyond the basic bumper cushion. PT thread ports are standard. For shock-absorber cushioning (B variants) or single-side stoppers, contact us. We supply allowable load, moment, and deflection data from the published tables and curves for your mounting orientation.
Applications
Adjustable Pick-and-Place
Fine-tune the pickup and release end positions with the dual rubber stoppers while the ball-bearing guide holds deflection low across the 100 mm stroke.
Parts Transfer Slide
Shuttle small components between stations on a clean line where the anti-rust, dust-proof guide resists contamination and stoppers set exact endpoints.
Assembly Stage Positioner
Position a tooling head at each cycle with adjustable end stops, using the symmetrical body to mount from either side in a compact fixture.
FAQ
What does the A in HLQL20X100SA mean for the adjuster?
The A code means adjustable rubber stoppers are fitted at both ends, letting you fine-tune the extension and retraction end positions. This is distinct from the basic variant (no code after S) which uses fixed rubber bumpers only, and from B variants which use shock absorbers instead of rubber stoppers.
How fast can this cylinder travel and what pressure is allowed?
Operating pressure for bore 20 is 0.15-0.7 MPa (22-100 psi), with a maximum of 0.7 MPa. Speed should be meter-out controlled to 50-500 mm/s. Allowable load and moment are verified from the AirTAC datasheet tables and deflection curves on request.