Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SAF
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SAF is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SAF
The HLQL20X100SAF is a symmetrical double-acting dual-rod slide-table cylinder that integrates an air cylinder with a ball-bearing linear guide for straight, low-deflection motion. At bore 20 and stroke 100 mm it delivers moderate thrust for everyday guided tasks; the dual rod doubles that thrust while a floating joint protects the rod from side torque. The AF adjuster places an adjustable rubber stopper on the retraction side only, giving fine position control at the home or retracted end without adding hardware at the extension end.
This is a genuine AirTAC part with a standard sintered NdFeB magnet for position sensing. Sensor switches CMSH, DMSH, and EMSH fit the magnetic-switch slots on the body. We confirm exact thrust, dimensions, and allowable load-moment values from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SAF Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 20 provides moderate push force; increasing the bore raises thrust without affecting guide accuracy. The HLQL ball-bearing sub-family is preferred over HLS cross-roller when anti-rust and dust-proof operation are key, and the symmetrical body suits tight one-side mounting. Stroke 100 mm is within the bore 20 stroke table.
The AF adjuster applies an adjustable rubber stopper on the retraction side only, ideal when the retracted home position must be repeatable but the extension end uses the standard bumper. PT thread ports are standard. For both-end stoppers (A) or shock absorbers (B/BS/BF), contact us. We supply allowable load, moment, and deflection data from the published tables and curves for your specific mounting.
Applications
Retract-Home Pick-and-Place
Set a repeatable retracted home position with the retraction-side rubber stopper while the ball-bearing guide keeps travel straight over the 100 mm stroke.
Small-Parts Transfer
Move lightweight parts on a clean production line where the anti-rust, dust-proof ball-bearing guide resists contamination and the stopper holds the home position.
Assembly Stage Slide
Position a workpiece at each cycle with a tunable retraction stop, using the symmetrical body for either-side mounting in a compact fixture.
FAQ
What does AF mean in the model code HLQL20X100SAF?
AF means an adjustable rubber stopper is fitted on the retraction side only. This lets you fine-tune the retracted end position. It differs from A (stoppers at both ends) and from basic (fixed bumpers only). B-type shock-absorber adjusters are also available on this bore.
What pressure range and speed apply to this bore?
For bore 20 the operating pressure is 0.15-0.7 MPa (22-100 psi), never exceeding 0.7 MPa maximum. Meter-out speed control should keep travel within 50-500 mm/s. Allowable load and moment are confirmed from the AirTAC datasheet tables and deflection curves on request.