Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SBS
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SBS is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SBS
The AirTAC HLQL20X100SBS is a symmetrical ball-bearing guided slide-table cylinder with a 20 mm bore and 100 mm stroke. It integrates an air cylinder with a linear ball-bearing guide so the table travels straight with minimal deflection. The dual-rod design doubles thrust while a floating joint protects the rods from side torque. The HLQL symmetrical body suits centered mounting. This bore gives higher thrust for heavier workpieces, and the ball-bearing guide adds anti-rust and dust-proof properties for harsher environments. The BS adjuster adds shock absorbers on the extension side to soften end-of-stroke impact.
This is a genuine AirTAC part with a standard magnet for position sensing. CMSH, DMSH, and EMSH sensor switches mount in the body slots. We confirm thrust, dimensions, and allowable load-moment values from the AirTAC datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SBS Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X100SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose bore 20 when your application needs higher thrust than smaller bores provide - the bigger bore moves more force without increasing pressure beyond the 0.7 MPa maximum. The HLQL ball-bearing guide is ideal where anti-rust and dust-proof performance matter more than the maximum rigidity of a cross-roller (HLS) guide. Stroke 100 mm gives ample travel for transfer or positioning tasks. The BS shock-absorber adjuster on the extension side manages kinetic energy at the extend end; combine with meter-out speed control at 50-500 mm/s. Thread is PT. We confirm allowable load, moment, and deflection from published tables and curves for your specific mounting.
Applications
Parts Transfer Line
Moves components 100 mm between stations on a conveyor line with shock-absorber control at the extend end for smooth deceleration.
Pick-and-Place Head
Traverses a gripper 100 mm to pick parts from one position and place them at another with ball-bearing precision and anti-rust protection.
Indexing Station
Indexes a workpiece holder through a 100 mm stroke with dual-rod thrust and symmetrical mounting for balanced load handling.
FAQ
What does the BS adjuster code mean on HLQL20X100SBS?
BS indicates a shock absorber fitted on the extension side only. This cushions the extend end of the 100 mm stroke. The retract side uses the standard bumper. Shock absorbers are available on bore sizes 8 and above - not bore 6.
What is the maximum working pressure for this cylinder?
The maximum working pressure is 0.7 MPa (100 psi). For bore 20 the operating range is 0.15-0.7 MPa (22-100 psi). Never exceed 0.7 MPa. Allowable load and moment values are confirmed from the AirTAC datasheet tables on request.