Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X10SBS
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X10SBS is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X10SBS
The AirTAC HLQL20X10SBS is a symmetrical ball-bearing slide-table cylinder with a 20 mm bore and 10 mm stroke. It combines an air cylinder with a linear ball-bearing guide for straight, low-deflection table travel. The dual-rod construction doubles thrust in a compact footprint, and a floating joint isolates the rods from side torque. The ball-bearing guide provides anti-rust and dust-proof operation for harsh or clean environments.
This is a genuine AirTAC part with a standard magnet for position sensing using CMSH, DMSH, or EMSH switches in the body slots. The BS adjuster installs a shock absorber on the extension side to cushion forward end-of-stroke impact. We verify thrust, dimensions, and load-moment values from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X10SBS Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X10SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 20 mm bore delivers moderate thrust in a compact guided package - larger bores increase push force without affecting the 10 mm stroke. The HLQL ball-bearing guide is the right pick when anti-rust and dust-proof operation matter more than the maximum rigidity of an HLS cross-roller. The BS extension-side shock absorber cushions the forward stroke end, useful when the table contacts a workpiece or stop. Thread is PT. Route load-moment and deflection sizing to us - we confirm against the published tables and curves.
Applications
Pick-and-Place Head
Positions a gripper over a part with 10 mm of extension travel cushioned by the extension-side shock absorber.
Small-Parts Transfer
Shifts a small workpiece between conveyor lanes with ball-bearing guide precision and dust-proof operation.
Assembly Stage Push
Pushes a component into a fixture with extension-side shock absorption for smooth, repeatable seating.
FAQ
What does the BS adjuster code mean on this HLQL cylinder?
BS indicates a shock absorber fitted on the extension side. The retraction side uses the standard rubber bumper. This cushions the forward end-of-stroke impact, useful when the table pushes against a workpiece or stop.
Is the magnet optional on this HLQL slide table?
No - the magnet is standard on every HLQL model. The S in the code confirms it. Position sensing uses CMSH, DMSH, or EMSH switches mounted in the body slots.