Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X125S
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X125S is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X125S
The AirTAC HLQL20X125S is a symmetrical ball-bearing slide-table cylinder with a 20 mm bore and 125 mm stroke. It integrates an air cylinder with a linear ball-bearing guide so the table moves straight over a long reach with low deflection. The dual-rod design doubles thrust within a compact body, and the floating joint shields the rods from side torque. The ball-bearing guide is anti-rust and dust-proof, making it well suited to harsh or contaminated environments.
This is a genuine AirTAC part with a standard magnet for position sensing using CMSH, DMSH, or EMSH switches in the body slots. The basic bumper cushion is standard on both ends. We confirm thrust, dimensions, and load-moment values from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X125S Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X125S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 20 mm bore gives moderate thrust in a compact guided package - larger bores increase push force proportionally. The HLQL ball-bearing guide provides anti-rust, dust-proof operation ideal for environments where corrosion resistance matters. The 125 mm stroke delivers a long reach within the bore's published stroke table. Thread is PT. Route load-moment and deflection sizing to us - we verify against the published tables and curves for your application.
Applications
Long-Reach Pick-and-Place
Traverses a gripper across a 125 mm span with ball-bearing guide straightness for accurate part pickup.
Lane Transfer Shuttle
Moves small parts between parallel conveyor lanes with anti-rust, dust-proof guide operation over 125 mm.
Sorting Diverter
Pushes items to one of two chute paths with precise guided travel and floating-joint torque protection.
FAQ
How do I choose between HLQL and HLS guide types for a 20 mm bore?
HLQL uses a ball-bearing guide that is anti-rust and dust-proof, ideal for harsh or clean environments. HLS uses a cross-roller guide for the highest rigidity and load capacity. Pick HLQL when corrosion resistance and dust protection matter more than maximum rigidity.
How fast can this cylinder operate, and what limits cycle speed?
Speed range is 50-500 mm/s with meter-out speed control. The 125 mm stroke means a full cycle travels 250 mm total. We confirm allowable kinetic energy and load-moment from the datasheet tables for your specific application.