Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X150SAF
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X150SAF is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X150SAF
The AirTAC HLQL20X150SAF is a symmetrical double-rod ball-bearing slide-table cylinder with a 20 mm bore and 150 mm stroke. An adjustable rubber stopper is fitted on the retraction side for controlled pull-back deceleration; the extension side uses the basic bumper. The integrated ball-bearing guide maintains straight, low-deflection travel; the dual rod doubles thrust and the floating joint protects the rod from side torque. Anti-rust and dust-proof properties suit clean or mildly corrosive environments.
This is a genuine AirTAC part carrying a standard sintered NdFeB magnet; CMSH, DMSH, or EMSH switches fit the body slots for position sensing. We confirm thrust, dimensions, allowable load-moment and deflection from the published datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X150SAF Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X150SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
A 20 mm bore delivers moderate-to-higher thrust for this slide-table family; pick a larger bore for more push or a smaller bore for a lighter unit. The HLQL ball-bearing guide is preferred when anti-rust and dust-proof operation matter; HLS cross-roller offers greater rigidity if that is your priority. Stroke 150 mm is within the bore-20 range. The AF adjuster code places an adjustable rubber stopper on the retraction side only, ideal when the return stroke carries the load and the extension side does not. Thread is PT; specify G or T for other thread standards. Load, moment and deflection sizing can be confirmed from the published tables and curves on request.
Applications
Retract-Loaded Transfer
Pull a loaded pallet fixture back 150 mm after machining, using the retraction-side rubber stopper to cushion the return while the extension side relies on the standard bumper.
Pull-Back Dispenser
Retract a dispensing head from a fill position on anti-rust ball-bearing rails, with the rubber stopper tuning the pull-back deceleration to prevent fluid splash.
Assembly Return Stroke
Serve as a return actuator in a two-station assembly cell where the tooling is pushed out by an external feed and the HLQL unit pulls it back with controlled stopper cushioning.
FAQ
What does the AF adjuster code mean on the HLQL20X150SAF?
The AF code means an adjustable rubber stopper is fitted on the retraction (pull-back) side only. The extension side uses the standard bumper. This is useful when the return stroke carries a load or needs gentler deceleration than the outward stroke. For stoppers on both ends choose A; for shock absorbers choose B or the single-side BS/BF variants.
What pressure and speed range apply to this 20 mm bore model?
Maximum working pressure is 0.7 MPa (100 psi). Operating range for a 20 mm bore is 0.15 to 0.7 MPa (22 to 100 psi). Recommended speed is 50 to 500 mm/s with meter-out flow control. Allowable load, moment and deflection are confirmed from the published datasheet tables and curves on request.