Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X50SBS
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X50SBS is a genuine HLQ slide-table cylinder, 20 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 236 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore20 mm
- Push thrust @0.5 MPa236 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X50SBS
The AirTAC HLQL20X50SBS is a double-acting dual-rod slide-table cylinder pairing an air cylinder with a ball-bearing linear guide for straight, low-deflection table travel. The dual rod doubles thrust while a floating joint protects the rod from side torque. The ball-bearing guide is anti-rust and dust-proof, making it well suited to environments where corrosion or particulate contamination is a concern. This 20 mm bore, 50 mm stroke model delivers higher thrust for a bigger bore, and the BS adjuster adds a shock absorber on the extension side for controlled end-of-stroke deceleration.
This is a genuine AirTAC part with a standard magnet fitted for position sensing. Compatible sensor switches include CMSH, DMSH, and EMSH series, which install in the magnetic-switch slots on the body. We confirm the exact thrust, dimensions, allowable load, and moment values from the datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X50SBS Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL20X50SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 20 mm |
| Push thrust @0.5 MPa | 236 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Select the 20 mm bore when your application needs higher thrust in a compact guided slide - the verified thrust figure appears in the published spec table, not as a hand-picked number here. The ball-bearing HLQL guide is the right choice over cross-roller HLS when anti-rust and dust-proof operation take priority, and the symmetrical body supports centered or reversible mounting. The 50 mm stroke sits within the bore 20 range. The BS adjuster places a shock absorber on the extension side only; choose BF for retraction-side or B for both ends if needed. Thread is PT. Route load, moment, and kinetic-energy sizing to us - those figures are published as tables and deflection curves.
Applications
Gripper Traverse
Attach a gripper to the ball-bearing table for dust-proof, anti-rust traverse in pick-and-place cells where clean or wash-down conditions apply.
Parts Rejection Gate
Use the 50 mm extension stroke with extension-side shock absorption to push non-conforming parts off a conveyor line smoothly.
Carton Stopper
Deploy the symmetrical slide as a retractable stopper in a packaging line, with the extension-side shock absorber softening contact at full extend.
FAQ
What is the difference between BS and BF adjuster codes on HLQL20X50?
BS places a shock absorber on the extension side only; BF places it on the retraction side only. If you need shock absorption at both ends, choose a model coded B (shock absorber both ends). The bumper still cushions the uncushioned end.
How fast can the HLQL20X50SBS travel, and what pressure range applies?
Speed range is 50-500 mm/s with proper meter-out flow control. Operating pressure for the 20 mm bore is 0.15-0.7 MPa (22-100 psi). Never exceed 0.7 MPa maximum working pressure.