Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X100SA
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X100SA is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X100SA
The AirTAC HLQL25X100SA is a symmetrical ball-bearing slide-table cylinder with a 25 mm bore, 100 mm stroke, and adjustable rubber stoppers at both ends. It integrates an air cylinder with a linear ball-bearing guide so the moving table travels straight with low deflection. The dual-rod design doubles thrust, and a floating joint spares the rods from side torque. The ball-bearing guide is anti-rust and dust-proof, well suited to clean guided travel in moderate environments.
This is a genuine AirTAC part. The magnet is standard, and sensor switches CMSH, DMSH, or EMSH mount in the body slots. Adjustable rubber stoppers at both ends let you fine-tune end positions beyond the bumper cushion. We confirm exact thrust, dimensions, allowable load, and moment values from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X100SA Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X100SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 provides higher thrust for larger workpieces. Choose the HLQL ball-bearing guide when anti-rust and dust-proof properties matter more than cross-roller rigidity; the symmetrical body suits centered loads. Stroke 100 mm is within the bore 25 range. The A adjuster adds adjustable rubber stoppers at both ends for precise end positioning. Thread is PT. Route allowable load and moment sizing to us; these are published as tables and deflection curves.
Applications
Pick-and-Place Transfer
Dual-rod ball-bearing guide moves parts between stations with straight travel; rubber stoppers at both ends fine-tune the 100 mm stroke end positions.
Assembly Stage Indexing
Symmetrical slide indexes a workpiece at a fixture with adjustable rubber stoppers setting exact stopping points on extension and retraction.
Gripper Traverse
Anti-rust dust-proof ball-bearing table carries a gripper across a conveyor, with rubber stoppers controlling deceleration at each end.
FAQ
What does the A in HLQL25X100SA mean?
The A indicates adjustable rubber stoppers at both ends, letting you fine-tune the end positions beyond the standard bumper cushion. For harder deceleration, bore 25 also supports B-type shock absorbers (code B).
What is the maximum operating pressure for the 25 mm bore?
The maximum working pressure is 0.7 MPa (100 psi). The operating range for bore 25 is 0.15-0.7 MPa (22-100 psi). Speed is 50-500 mm/s with meter-out flow control.