Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X10SAF
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X10SAF is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X10SAF
The AirTAC HLQL25X10SAF is a symmetrical ball-bearing slide-table cylinder with a 25 mm bore and 10 mm stroke. As an HLQL-series unit it integrates an air cylinder with a linear ball-bearing guide so the work table travels straight with low deflection. The dual-rod design doubles thrust and a floating joint spares the rods from side torque. The ball-bearing guide is anti-rust and dust-proof, making it well suited to clean or mildly humid environments.
This is a genuine AirTAC part with a standard magnet for position sensing; compatible sensor switches include CMSH, DMSH, and EMSH series mounted in the body slots. The AF adjuster adds an adjustable rubber stopper on the retraction side for controlled end-of-stroke contact. We confirm thrust, dimensions, and allowable load-moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X10SAF Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X10SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose a 25 mm bore when the application needs higher thrust than smaller bores provide; the exact thrust value is listed in the verified spec table for this model. The HLQL ball-bearing guide is the right pick when anti-rust and dust-proof operation matter more than the maximum rigidity of a cross-roller (HLS) guide. Stroke must fall within the bore 25 stroke range from the datasheet. The AF adjuster places an adjustable rubber stopper on the retraction side only; for shock absorption choose a B-type variant. Thread is PT as standard; G or NPT are available on request. Route allowable load, moment, and deflection sizing to us -- these are published as tables and curves.
Applications
Pick-and-Place Head
Guides a vacuum gripper between two fixture points with repeatable positioning and minimal lateral shift at 10 mm stroke.
Parts Transfer Stopper
Moves a blocking finger into a conveyor lane to halt workpieces precisely for downstream inspection.
Assembly Stage Index
Advances a clamped component a short 10 mm distance into an assembly press with straight ball-guided travel.
FAQ
What does the AF adjuster code mean on this model?
AF indicates an adjustable rubber stopper fitted on the retraction side only. The extension side uses the standard bumper cushion. If you need shock absorbers or a stopper on the extension side instead, select an AS, B, or BS variant.
What is the maximum operating pressure for the HLQL25?
Maximum working pressure is 0.7 MPa (100 psi). Operating pressure for the 25 mm bore is 0.15 to 0.7 MPa (22 to 100 psi). Never exceed 0.7 MPa; proof pressure is 1.2 MPa.