Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125S
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125S is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125S
The AirTAC HLQL25X125S is a symmetrical ball-bearing slide-table cylinder that integrates an air cylinder with a linear guide so the moving table travels straight. The dual-rod design doubles thrust while a floating joint spares the rods from side torque. At bore 25 and stroke 125, this slide delivers higher thrust for a bigger bore over a longer reach. The ball-bearing guide provides anti-rust, dust-proof operation with smooth precise travel across the full stroke.
This is a genuine AirTAC part with a standard magnet for position sensing. Compatible sensor switches include CMSH, DMSH, and EMSH series, which seat in the magnetic-switch slots on the body. We confirm the exact thrust, dimensions, and allowable load-moment from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125S Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The bore 25 suits applications needing higher thrust; a bigger bore gives more push without added complexity. Choose the HLQL ball-bearing guide when anti-rust and dust-proof operation matter more than the maximum rigidity of a cross-roller type. Stroke 125 sits within the bore 25 stroke range. This model uses the basic bumper stopper with no adjuster option selected. Thread is PT standard; contact us for G or NPT alternatives. We route load and moment sizing from published AirTAC tables and deflection curves.
Applications
Pick-and-Place Head
Carry a gripper across a 125 mm reach with the ball-bearing guide maintaining straight low-deflection travel throughout the stroke.
Small-Parts Transfer
Transfer workpieces across a wider span with symmetrical dual-rod thrust and anti-rust dust-proof guidance.
Bin-Load Pusher
Push parts into a bin or fixture at the end of a 125 mm stroke where precise stop position matters.
FAQ
Is the magnet standard on the HLQL25X125S?
Yes. The S in the model code means a magnet is fitted. Every HLQL slide table ships with a standard magnet for position sensing, compatible with CMSH, DMSH, and EMSH sensor switches.
How is allowable load and moment confirmed for this slide table?
Allowable load, moment, and kinetic energy are published in AirTAC tables and deflection curves. We confirm these values from the datasheet for your specific application rather than estimating.