Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125SA
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125SA is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125SA
The AirTAC HLQL25X125SA is a symmetrical double-acting dual-rod slide-table cylinder that integrates an air cylinder with a ball-bearing linear guide, so the moving table travels straight with low deflection. The 25 mm bore delivers higher thrust for a bigger bore, and the dual rod doubles that thrust while a floating joint spares the rods from side torque. The HLQL ball-bearing guide is anti-rust and dust-proof, with a double-rail configuration at this bore for rigid, precise guided travel over a 125 mm stroke.
This is a genuine AirTAC part. A magnet is standard for position sensing with CMSH, DMSH, or EMSH switches fitted in the body slots. We confirm the exact thrust, dimensions, and load-moment ratings from the datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125SA Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 25 mm bore when you need higher thrust in a guided slide without going to a separate actuator; a bigger bore gives more push. The HLQL ball-bearing guide suits environments where anti-rust and dust-proof operation matter, and the double rail at bore 25 adds rigidity. The 125 mm stroke must fall within the bore's published stroke table. This model carries adjustable rubber stoppers at both ends for controlled end-position cushioning. Thread is PT (tapered). Contact us to confirm allowable load, moment, and kinetic-energy values from the published tables and deflection curves for your application.
Applications
Pick-and-Place Head
Guides a gripper across a 125 mm stroke for precise component placement with ball-bearing straightness.
Small-Parts Transfer
Shifts parts between stations on a symmetrical table with anti-rust, dust-proof guidance for clean operation.
Assembly Stage Stop
Uses the adjustable rubber stoppers at both ends to position a workpiece repeatably for an assembly operation.
FAQ
What does the SA in HLQL25X125SA mean?
The S indicates a magnet is fitted (standard on the whole line), and A means adjustable rubber stoppers at both ends for controlled end-position cushioning. The thread is PT (tapered) since no G or T suffix is present.
What is the maximum operating pressure for this bore?
Maximum working pressure is 0.7 MPa. For the 25 mm bore the operating range is 0.15-0.7 MPa (22-100 psi). Meter-out speed control should keep travel within 50-500 mm/s. Load and moment ratings are confirmed from the datasheet on request.