Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125SAS
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125SAS is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125SAS
The AirTAC HLQL25X125SAS is a symmetrical double-acting dual-rod slide-table cylinder that integrates an air cylinder with a ball-bearing linear guide so the moving table travels straight with low deflection. The 25 mm bore provides higher thrust for a bigger bore, the dual rod doubles that thrust, and a floating joint prevents side torque on the rods. The HLQL ball-bearing guide is anti-rust and dust-proof, using a double rail at bore 25 for rigid, precise guided travel across a 125 mm stroke.
This is a genuine AirTAC part. A magnet is standard for position sensing, compatible with CMSH, DMSH, or EMSH switches in the body slots. We confirm the exact thrust, dimensions, and load-moment ratings from the datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125SAS Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X125SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Select the 25 mm bore when you need higher thrust from a guided slide; a bigger bore gives more push. The HLQL ball-bearing guide suits anti-rust, dust-proof applications, with a double rail at this bore adding rigidity. The 125 mm stroke must fall within the bore's published stroke range. This model carries an adjustable rubber stopper on the extension side for controlled cushioning at that end. Thread is PT (tapered). Contact us to verify allowable load, moment, and kinetic-energy values from the published tables and deflection curves.
Applications
Side-Transfer Slide
Shifts small parts laterally across a 125 mm ball-bearing stroke with symmetrical table geometry for balanced loading.
Assembly Stage Traverse
Positions a fixture for an assembly operation using the extension-side rubber stopper for repeatable forward-end placement.
Reject Diverter
Diverts non-conforming parts off a line with a dust-proof, anti-rust ball-bearing guide in a washdown-prone area.
FAQ
What does AS mean in HLQL25X125SAS?
After the S (magnet fitted, standard on this line), AS means an adjustable rubber stopper on the extension side only. The thread is PT (tapered) since no G or T suffix follows.
Can I use this slide table at 1.0 MPa?
No. Maximum working pressure is 0.7 MPa. For the 25 mm bore the operating range is 0.15-0.7 MPa (22-100 psi). Proof pressure is 1.2 MPa, but that is a test pressure, not a working limit. Load and moment data are confirmed from the datasheet on request.