Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SAF
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SAF is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SAF
The AirTAC HLQL25X150SAF is a symmetrical ball-bearing slide-table cylinder with a 25 mm bore and 150 mm stroke. It integrates a dual-rod air cylinder with a ball-bearing linear guide so the table travels straight under load. The dual rod doubles the thrust and a floating joint protects the rods from side torque. The ball-bearing guide provides smooth, precise travel and is anti-rust and dust-proof, making it well suited to clean or mildly corrosive environments. The AF adjuster adds an adjustable rubber stopper on the retraction side for fine end-position control.
This is a genuine AirTAC part with a standard sintered NdFeB magnet for position sensing; compatible sensor switches are CMSH, DMSH, or EMSH, which fit the magnetic-switch slots on the body. We confirm thrust, dimensions, and allowable load/moment from the AirTAC datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SAF Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 provides higher thrust than smaller bores in this family; for exact thrust refer to the published spec table. The symmetrical HLQL body shares the same ball-bearing guide as HLQ, giving anti-rust, dust-proof guidance with precise travel. Choose stroke 150 from the bore-25 stroke table and add the AF retraction-side rubber stopper when you need controlled end positioning on retraction only. Thread is PT; G or NPT can be specified on other models. For allowable load and moment, route sizing to us - AirTAC publishes these as tables and deflection curves.
Applications
Pick-and-Place Head
Mounts a gripper for precise linear pickup and placement of parts on an assembly line.
Small-Parts Transfer
Transfers small components between stations with smooth ball-bearing guided travel.
Adjustable Stopper Stage
Uses the retraction-side rubber stopper to set a repeatable end position for indexing workpieces.
FAQ
What does the AF code mean on HLQL25X150SAF?
AF indicates an adjustable rubber stopper fitted on the retraction side only, allowing fine end-position control on retraction. The extension side uses the standard bumper cushion.
What is the maximum operating pressure for this model?
Maximum working pressure is 0.7 MPa (100 psi). The operating range for bore 25 is 0.15-0.7 MPa (22-100 psi). Proof pressure is 1.2 MPa (175 psi). Never exceed 0.7 MPa in service.