Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SAS
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SAS is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SAS
The HLQL25X150SAS is a genuine AirTAC symmetrical ball-bearing slide-table cylinder combining a double-acting dual-rod air cylinder with a linear ball-bearing guide. The integrated guide lets the moving table travel straight with low deflection, while the dual rod doubles the thrust and the floating joint spares the rod from side torque. The ball-bearing design is anti-rust and dust-proof, making it well suited to clean or mildly corrosive environments. At bore 25 and stroke 150, this model provides higher thrust for a bigger bore.
A magnet is standard on every HLQL unit, enabling position sensing with CMSH, DMSH, or EMSH sensor switches fitted to the magnetic-switch slots on the body. We confirm the exact thrust, dimensions, and load-moment values for this model from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SAS Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SAS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose bore 25 when your application needs the higher thrust available from a larger bore in the HLQL range; the on-page spec table carries the verified thrust figure. Stroke 150 must be within the bore 25 stroke table - verify the available range before ordering. The AS adjuster adds an adjustable rubber stopper on the extension side for controlled end-of-travel contact; if you need stopping on both ends, consider the A variant, or for shock absorption look at B-type options. Thread is PT (standard). Because this is a ball-bearing guide, pick HLQL when anti-rust and dust-proof operation matter more than the maximum rigidity of a cross-roller (HLS) guide. Load, moment, and deflection are published as tables and curves - route sizing to us for confirmation.
Applications
Pick-and-Place Head
Mounts a small gripper for precise vertical or horizontal pick-and-place of parts in a clean-room or semi-clean assembly cell.
Small-Parts Transfer
Transfers lightweight components between conveyor stations with straight, low-deflection travel and anti-rust guide protection.
Assembly Stage Traverse
Positions a sub-assembly head along a 150 mm stroke with controlled rubber-stopper contact on the extension end for repeatable placement.
FAQ
What does the AS adjuster code mean on HLQL25X150SAS?
AS means an adjustable rubber stopper is fitted on the extension side only. The retraction side has the standard bumper. If you need rubber stoppers on both ends, choose the A variant; for shock absorbers, look at B, BS, or BF options. B-type shock absorbers are available on bore 25.
What is the maximum working pressure for this model?
The maximum working pressure is 0.7 MPa (100 psi). Operating pressure for bore 25 is 0.15-0.7 MPa (22-100 psi). Proof pressure is 1.2 MPa (175 psi). Speed should be controlled with meter-out flow to stay within 50-500 mm/s.