Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SBS
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SBS is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SBS
The AirTAC HLQL25X150SBS is a symmetrical ball-bearing slide-table cylinder with a 25 mm bore and 150 mm stroke. It integrates an air cylinder with a double-rail linear ball guide so the moving table travels straight with minimal deflection. The dual-rod design doubles thrust, and a floating joint protects the rods from side torque. Ball-bearing guides are anti-rust and dust-proof, suited to clean or wash-down environments.
This is a genuine AirTAC part, factory-fitted with a standard sintered NdFeB magnet for position sensing with CMSH, DMSH, or EMSH switches in the body slots. The BS adjuster adds a shock absorber on the extension side for end-of-stroke deceleration over the long 150 mm travel. We confirm exact thrust, dimensions, and allowable load-moment from the datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SBS Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X150SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 gives higher thrust than smaller bores in the HLQL ball-bearing range. Choose the ball-bearing guide when you need anti-rust, dust-proof operation with smooth low-friction travel; the symmetrical body suits center-loaded applications. The 150 mm stroke is within the bore 25 stroke range. The BS adjuster provides a shock absorber on the extension side for smooth deceleration over long travels. Port threads are PT; specify G or NPT if your fittings differ. We confirm allowable load, moment, and deflection curves from published tables for your sizing.
Applications
Long-Stroke Transfer
Moves parts 150 mm across a conveyor gap between processing stations with smooth ball-guide travel and shock-absorber end control.
Assembly Stage Index
Indexes a workpiece fixture into position for a pressing or joining operation, using the symmetrical body to center the load.
Shuttle Carriage
Shuttles a gripper 150 mm between pick and place positions with anti-rust ball guides suited to clean-room or wash-down environments.
FAQ
What does the BS adjuster mean on this model?
BS decodes as a shock absorber fitted on the extension side. The ball-bearing HLQL series supports shock-absorber options on bore 25. For retraction-side shock absorption choose BF instead.
What is the maximum operating pressure for bore 25?
Maximum working pressure is 0.7 MPa (100 psi). The operating range for bore 25 is 0.15-0.7 MPa (22-100 psi). We confirm allowable load and moment from the published datasheet tables on request.