Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X20SAF
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X20SAF is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X20SAF
The AirTAC HLQL25X20SAF is a double-acting dual-rod slide-table cylinder that integrates an air cylinder with a symmetrical ball-bearing linear guide, so the moving table travels straight with minimal deflection. The 25 mm bore and 20 mm stroke deliver higher thrust in a compact footprint, and the floating joint spares the rod from side torque. An adjustable rubber stopper on the retraction side controls end-of-stroke impact.
This genuine AirTAC part carries a standard magnet for position sensing via CMSH, DMSH, or EMSH switches mounted in the body slots. We confirm thrust, dimensions, and allowable load-moment from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X20SAF Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X20SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
The 25 mm bore provides higher thrust than smaller bores in the HLQL line, making it suited where more push is needed at 0.15-0.7 MPa. The ball-bearing guide offers anti-rust and dust-proof operation, a good choice over the cross-roller HLS when corrosion resistance matters. The symmetrical body allows equal mounting on either side. The AF adjuster places an adjustable rubber stopper at the retraction end only. This model uses PT thread ports. Route load, moment, and deflection sizing to us -- these are published as tables and curves.
Applications
Pick-and-Place Head
Mounts a gripper for precise linear transfer of parts between stations with low guide deflection.
Small-Parts Transfer
Moves components along a conveyor lane with the symmetrical ball-bearing guide keeping travel straight.
Assembly Stage Traverse
Positions a sub-assembly tooling head with repeatable stroke and retraction-side rubber stopper cushioning.
FAQ
What does the AF adjuster code mean on this HLQL model?
AF indicates an adjustable rubber stopper fitted at the retraction side only, letting you fine-tune end-of-stroke cushioning at the retract end without a shock absorber.
What is the maximum operating pressure for the 25 mm bore?
Maximum working pressure is 0.7 MPa. The operating range for bore 25 is 0.15-0.7 MPa (22-100 psi). Use meter-out speed control to keep travel within 50-500 mm/s.