Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X40SA
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X40SA is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X40SA
The AirTAC HLQL25X40SA is a symmetrical ball-bearing slide-table cylinder with adjustable rubber stoppers at both ends. Combining an air cylinder with a precision linear guide in one body, the dual-rod double-acting design at bore 25 and stroke 40 mm provides higher thrust for a larger bore. A floating joint protects the rods from side torque, and the anti-rust, dust-proof ball-bearing rails deliver precise straight-line travel with minimal deflection in clean environments.
This genuine AirTAC part carries a standard sintered NdFeB magnet for position sensing. CMSH, DMSH, and EMSH series sensor switches fit the magnetic-switch slots on the body. We confirm thrust, dimensions, allowable load, and moment from the AirTAC datasheet or on-page specification table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X40SA Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X40SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Select bore 25 for higher thrust applications; the dual-rod layout doubles force without side load on the guide. The HLQL ball-bearing guide with anti-rust and dust-proof rails is ideal for clean-room or washdown settings. This model includes adjustable rubber stoppers at both ends for tuning the end-of-stroke impact. Choose PT, G, or NPT threads to match fittings. We provide allowable load, moment, and deflection data from the published AirTAC tables and curves.
Applications
Pick-and-Place Head
Positions a gripper for accurate part placement on electronics assembly lines, with rubber stoppers tuning end-of-stroke deceleration at both ends.
Lateral Parts Transfer
Moves small components sideways between processing stations with symmetrical loading and ball-bearing precision for consistent positioning.
Assembly Fixture Traverse
Indexes workpieces through an assembly sequence with repeatable 40 mm stroke and adjustable rubber cushioning at both ends.
FAQ
What does the A in HLQL25X40SA mean?
The A code indicates adjustable rubber stoppers installed at both ends of the slide table, letting you fine-tune end-of-stroke cushioning. This differs from the basic bumper in HLQL25X40S and from shock-absorber versions (B, BS, BF).
Can I use this slide table at 1.0 MPa?
No. Maximum working pressure is 0.7 MPa (100 psi). For bore 25 the operating range is 0.15-0.7 MPa (22-100 psi). Proof pressure of 1.2 MPa is for factory testing only, not continuous operation.