Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SBS
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SBS is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SBS
A slide-table cylinder integrates an air cylinder with a linear guide so the moving table travels straight, and this HLQL25X50SBS is a symmetrical ball-bearing slide table, bore 25 mm, stroke 50 mm, with a shock absorber on the extension side. The dual rod doubles the thrust while the floating joint keeps side torque off the rod, so the ball-bearing guide carries the load with smooth, low-friction travel suited to anti-rust, dust-proof service.
This is a genuine AirTAC part, magnet-fitted as standard, with magnetic-switch slots on the body for CMSH, DMSH or EMSH sensors. We confirm thrust, dimensions and load-moment from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SBS Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X50SBS |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 gives higher thrust for a bigger-bore table - pick it when the workpiece and end-load need the capacity; for lighter duty choose a smaller bore in the HLQL range. The ball-bearing HLQL guide is the choice for anti-rust, dust-proof service with smooth travel; pick HLS for cross-roller rigidity, HLH for miniature roller-ball straightness, or HLF for a low-height body. Stroke 50 mm is within the bore 25 range. The BS code adds a shock absorber on the extension side; for retraction-side cushioning choose BF, or use the basic bumper if impacts are light. Thread is PT, port 1/8".
Applications
Pick-and-place traverse
Symmetrical ball-bearing slide carries a gripper across a 50 mm stroke with repeatable positioning for small-part handling.
Parts transfer stopper
Bore 25 dual-rod table pushes workpieces to a hold position; the extension-side shock absorber cushions the end-of-stroke load.
Assembly stage slide
Ball-bearing guide holds a fixture straight against offset loads during a press or insert cycle on the extension stroke.
FAQ
What does the BS adjuster code mean on this HLQL model?
BS = shock absorber fitted on the extension side; the retraction side uses the basic bumper. For BF the absorber is on the retraction side, and a plain S code means basic bumpers both ends. B-type shock absorbers are not offered on bore 6.
How is allowable load and moment confirmed for the HLQL25?
Load, moment and deflection are published in the AirTAC datasheet as Wmax/Emax tables and deflection curves; we confirm the values for your bore and stroke from the datasheet or on-page table on request.