Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X75S
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X75S is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X75S
A slide-table cylinder integrates an air cylinder with a linear guide so the moving table travels straight, and this HLQL25X75S is a symmetrical ball-bearing slide table, bore 25 mm, stroke 75 mm, with basic bumpers at both ends. The dual rod doubles the thrust while the floating joint keeps side torque off the rod, so the ball-bearing guide carries the load with smooth, low-friction travel suited to anti-rust, dust-proof service.
This is a genuine AirTAC part, magnet-fitted as standard, with magnetic-switch slots on the body for CMSH, DMSH or EMSH sensors. We confirm thrust, dimensions and load-moment from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X75S Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X75S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 gives higher thrust for a bigger-bore table - pick it when the workpiece and end-load need the capacity; for lighter duty choose a smaller bore in the HLQL range. The ball-bearing HLQL guide is the choice for anti-rust, dust-proof service with smooth travel; pick HLS for cross-roller rigidity, HLH for miniature roller-ball straightness, or HLF for a low-height body. Stroke 75 mm is within the bore 25 range. The plain S code means basic bumpers both ends; for heavier end-loads add B (both ends), BS (extension) or BF (retraction) shock absorbers. Thread is PT, port 1/8".
Applications
Pick-and-place traverse
Symmetrical ball-bearing slide carries a gripper across a 75 mm stroke with repeatable positioning for small-part handling.
Parts transfer stopper
Bore 25 dual-rod table pushes workpieces to a hold position with a longer 75 mm reach; basic bumpers cushion light end impacts.
Assembly stage slide
Ball-bearing guide holds a fixture straight against offset loads through a 75 mm press or insert cycle.
FAQ
Does this HLQL25X75S have a shock absorber?
No - the plain S code means basic bumpers at both ends. For heavier end-loads add B (shock absorbers both ends), BS (extension side) or BF (retraction side); B-type absorbers are not offered on bore 6.
What is the maximum working pressure for the HLQL bore 25?
Maximum working pressure is 0.7 MPa; the operating range for bore 25 is 0.15-0.7 MPa (22-100 psi). Use meter-out speed control to keep travel within 50-500 mm/s.