Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X75SA
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X75SA is a genuine HLQ slide-table cylinder, 25 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 378 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore25 mm
- Push thrust @0.5 MPa378 N
- Operating pressure0.15 - 0.7 MPa (22 - 100 psi)
- Port size1/8"
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X75SA
The AirTAC HLQL25X75SA is a symmetrical ball-bearing slide-table cylinder that integrates an air cylinder with a precision linear guide so the moving table travels straight. The symmetrical dual-rod design doubles thrust while a floating joint spares the rods from side torque. At bore 25 mm and stroke 75 mm this model provides higher thrust suited to larger guided payloads, and the ball-bearing guide offers anti-rust and dust-proof operation for demanding environments.
This is a genuine AirTAC part with a standard magnet for position sensing using CMSH, DMSH, or EMSH switches fitted to the magnetic-switch slots on the body. Adjustable rubber stoppers are fitted at both ends for controlled end-of-stroke contact. We confirm the exact thrust, dimensions, load-moment ratings, and deflection curves from the AirTAC datasheet or on-page spec table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X75SA Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL25X75SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 25 mm |
| Push thrust @0.5 MPa | 378 N |
| Port size | 1/8" (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.15 - 0.7 MPa (22 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 25 is chosen when the application needs higher thrust from a larger piston area - bigger bore means more push, as detailed in the verified thrust table. The HLQL ball-bearing guide suits environments where anti-rust and dust-proof performance matter, and the symmetrical layout helps balance loading. Stroke 75 mm must fall within the bore 25 stroke range listed in the datasheet. The A adjuster gives rubber-stopper cushioning at both ends; for heavier impact energy consider the B shock-absorber option (not available on bore 6). Thread is PT; G or NPT can be specified. Allowable load, moment, and kinetic energy are published as tables and curves - we confirm values from the datasheet for your specific mounting.
Applications
Small-Parts Transfer
Moves parts between stations on a conveyor line with precise ball-bearing guided travel at 75 mm stroke.
Assembly Stage Index
Indexes a workpiece or tooling plate into position for a press or pick-and-place operation using the symmetrical dual-rod table.
Gripper Traverse
Shifts a gripper assembly horizontally between pick and place positions with low deflection and anti-rust guide reliability.
FAQ
What does the A in HLQL25X75SA mean?
The A code indicates adjustable rubber stoppers at both ends of the stroke, providing bumper-style cushioning. Other options include AF (retraction side only), AS (extension side only), and B-series shock absorbers for higher impact energy, though B types are not offered on bore 6.
What is the maximum operating pressure for this cylinder?
Maximum working pressure is 0.7 MPa (100 psi). For bore 25 the operating range is 0.15-0.7 MPa (22-100 psi). Speed should be controlled with meter-out flow controls and kept within 50-500 mm/s.