Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL6X50S
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL6X50S is a genuine HLQ slide-table cylinder, 6 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 21 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore6 mm
- Push thrust @0.5 MPa21 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL6X50S
The AirTAC HLQL6X50S is a symmetrical double-rod, double-acting slide-table cylinder pairing an air cylinder with a ball-bearing linear guide. At bore 6 mm and stroke 50 mm, the table moves straight along the guide while the dual rod doubles thrust. A floating joint spares the rod from side torque, and the ball-bearing rail delivers anti-rust, dust-proof performance for clean or mildly corrosive environments.
This is a genuine AirTAC part fitted with a standard magnet for position sensing; compatible sensor switches include CMSH, DMSH, and EMSH series in the body slots. We confirm thrust, dimensions, and allowable load-moment values from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL6X50S Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL6X50S |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 21 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Bore 6 is sized for lighter-thrust duty; stepping up a bore increases push at the same pressure. The HLQL ball-bearing guide is the anti-rust, dust-proof option for smooth low-friction travel; HLS cross-roller gives higher rigidity, HLH miniature roller-ball offers best straightness with three port groups, and HLF cuts overall height. This model has the basic bumper cushion with no add-on adjuster. Thread is PT (tapered). Route load and moment sizing to us; published values appear in tables and deflection curves.
Applications
Pick-and-Place Head
Carries a small vacuum or gripper head for 50 mm pick-and-place strokes where ball-bearing precision keeps placement repeatable.
Gripper Traverse
Indexes a gripper between two positions on a small assembly line, benefiting from anti-rust ball-rail guidance in humid shop air.
Light-Part Sorting Gate
Actuates a sorting flap or pusher for small electronic or plastic parts with straight, low-deflection 50 mm travel.
FAQ
Does this model include a shock absorber or rubber stopper?
No. HLQL6X50S has the basic bumper cushion only. If you need end-position cushioning, select an A, B, AS, or AF adjuster variant; note that B-type shock absorbers are not available on bore 6.
How is allowable load and moment confirmed for this slide table?
Load, moment, and kinetic-energy limits are published in the datasheet as Wmax, Emax, and moment tables along with deflection curves. Contact us with your application details and we will confirm the values against the published tables.