Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL6X50SAF
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL6X50SAF is a genuine HLQ slide-table cylinder, 6 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 21 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore6 mm
- Push thrust @0.5 MPa21 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL6X50SAF
The AirTAC HLQL6X50SAF is a symmetrical ball-bearing slide-table cylinder with a 6 mm bore and 50 mm stroke. A dual-rod double-acting air cylinder is integrated with a linear ball-bearing guide so the moving table travels straight with minimal deflection. The floating joint spares the rods from side torque, and the dual rods double the thrust for this small bore. The ball-bearing guide is anti-rust and dust-proof, suited to clean or mildly corrosive environments.
This is a genuine AirTAC part with a standard magnet fitted for position sensing with CMSH, DMSH, or EMSH switches in the body slots. We confirm thrust, dimensions, and allowable load/moment from the datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL6X50SAF Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL6X50SAF |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 6 mm |
| Push thrust @0.5 MPa | 21 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Choose the 6 mm bore when you need light thrust in a compact, symmetrical package; a bigger bore gives more push. The HLQL ball-bearing guide offers anti-rust, dust-proof operation where a cross-roller HLS might be over-specified. Stroke 50 mm is within the bore 6 range. The AF adjuster adds an adjustable rubber stopper on the retraction side; the port thread is PT. Route load and moment sizing to us - allowable values are published as tables and deflection curves.
Applications
Pick-and-Place Head
Mounts a small suction cup or gripper for precise component placement on a PCB assembly line.
Small-Parts Transfer
Shuttles lightweight plastic or metal parts between stations with straight, repeatable travel.
Gripper Traverse
Positions a miniature parallel gripper for pick-off at a test fixture with minimal guide deflection.
FAQ
What does the AF adjuster code mean on this model?
AF adds an adjustable rubber stopper on the retraction side only. The extension side uses the standard bumper. B-type shock absorbers are not available on the 6 mm bore.
What is the maximum operating pressure for the HLQL6?
Maximum working pressure is 0.7 MPa (100 psi). For the 6 mm bore the operating range is 0.2-0.7 MPa (29-100 psi). Never exceed 0.7 MPa.