Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X30SA
The AirTAC Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X30SA is a genuine HLQ slide-table cylinder, 8 mm bore: a double-acting dual-rod air cylinder integrated with a ball-bearing guide so the table travels straight with high rigidity and low deflection. It delivers about 38 N of push at 0.5 MPa. This is the symmetrical version. A floating joint spares the rod from side torque; the magnet is fitted as standard.
- TypeSlide-table, double acting
- Guideball-bearing guide
- Bore8 mm
- Push thrust @0.5 MPa38 N
- Operating pressure0.2 - 0.7 MPa (29 - 100 psi)
- Port sizeM5x0.8
- CushionBumper (+ shock-absorber option)
- Magnet / sensorStandard; CMSH/DMSH/EMSH
- ThreadPT
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X30SA
The HLQL8X30SA is a symmetrical double-acting dual-rod slide-table cylinder integrating an air cylinder with a ball-bearing linear guide. The ball-bearing guide is anti-rust and dust-proof, ensuring smooth precise travel with low deflection. Dual rods double the thrust for a bore 8 body, and a floating joint protects the rods from side torque. An adjustable rubber stopper on the extension side cushions the 30 mm stroke at that end.
This is a genuine AirTAC part with a standard magnet for position sensing; compatible sensor switches are CMSH, DMSH, and EMSH, which mount in the body's magnetic-switch slots. We confirm the exact thrust, dimensions, allowable load, and moment values from the AirTAC datasheet or on-page table on request.
Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X30SA Technical Specifications
| Model | Airtac HLQL Dual Axis Precision Slide Table Cylinder HLQL8X30SA |
|---|---|
| Type | Slide-table cylinder, double acting, dual rod |
| Series / guide | HLQL (ball-bearing guide) |
| Bore | 8 mm |
| Push thrust @0.5 MPa | 38 N |
| Port size | M5x0.8 (PT thread) |
| Fluid | Air, filtered to 40 um |
|---|---|
| Operating pressure | 0.2 - 0.7 MPa (29 - 100 psi) |
| Proof pressure | 1.2 MPa (175 psi) |
| Temperature | -20 to 70 C |
| Speed range | 50 - 500 mm/s (meter-out) |
| Cushion | Bumper; shock-absorber / adjustable-stopper options |
| Magnet / sensor | Standard; CMSH, DMSH, EMSH |
Specifications follow the official AirTAC HL slide-table data. Max working pressure is 0.7 MPa. The table rides on an integrated linear guide — do not apply strong impact or large moment. Allowable load and moment are published as tables and curves, and overall dimensions vary per stroke — ask us and we confirm from the datasheet.
How to choose
Select the bore by the thrust you need - a larger bore gives more push, and bore 8 suits lighter-duty applications. The HLQL ball-bearing sub-family is chosen when anti-rust and dust-proof guidance are required, and the symmetrical L version centers the load for balanced travel. Verify that stroke 30 mm falls within the bore 8 range in the datasheet. The AS adjuster adds an adjustable rubber stopper on the extension side for tunable end-of-stroke cushioning there. We route allowable load and moment sizing to the published AirTAC tables and deflection curves on request.
Applications
Pick-and-Place Head
Positions a small suction cup for component pickup with dust-proof ball-rail precision and extension-side rubber stopper cushioning.
Assembly Stage Stop
Feeds a workpiece to an assembly position where the adjustable stopper on the extension side sets the precise forward limit.
Gripper Traverse
Indexes a gripper between pick positions with the symmetrical ball-bearing guide maintaining low deflection over 30 mm of travel.
FAQ
What does the AS adjuster do on this model?
AS indicates an adjustable rubber stopper installed on the extension side of the stroke. It lets you fine-tune the end-of-stroke cushioning on the forward end while the retraction side uses the standard bumper.
What pressure range applies to this bore 8 slide table?
For bore 8 the operating pressure range is 0.2-0.7 MPa (29-100 psi), with a maximum working pressure of 0.7 MPa. Keep travel speed between 50 and 500 mm/s using meter-out flow control.